Feature(may vary by option.)

●Compatible models: MT-07 14-17
●EZ-FIT, Color: Black, Aluminum, Switch Hole, Weight: 530g
●Handle outer diameter: 0.9 inches (22.2 cm), Inner diameter: 0.5 inches (14 cm), Original ratio: 0.3 inches (7 mm) up/0.3 inches (7
●Width: 27.0 inches (684 mm), Height: 2.2 inches (57 mm), Depth: 5.8 inches (147 mm), Aperture Angle: 22°, Standing Angle: 45°

[Black]

Description

Product Description

Bolt-on Handlebar for Vehicle Vehicles: The design is based on the normal shape of the handle, and the grip part moves parallel.
The angle is equal to normal so you can form a good riding position without compromising the image.
No need to replace brake hoses or cables. You will not be able to use factory handlebar ends. Please use EFFEX handlebar weights (inner diameter Φ14).

Indications

Depending on the model, the full width of the vehicle verification may differ from the product listed on the model

Legal Disclaimer

Due to inventory differences, there may be some time differences. If you need a rush order, please check the inventory in advance

From the Manufacturer

The easy fit bar will help you solve it.

To prevent the balance of normal,

Just a few

Fits your body

Thats why the Easy Fit Bar was born.

EFFEX Bolt-On Handle Bar

No cable replacement required
Pre-Drilled
Clamps have knurling processing.

Pursues the best position for each car model!

The EFFEX Easy Fit Bar features a parallel grip design based on the normal handle.

While maintaining a good balance of normal, we pursued the best position to respond to riders "a little more".

We also pay attention to the ease of installation of the handle.

EZ-Fit Bar High: For a more comfortable position. Adjusts from the normal handle approximately 0.6 - 1.2 inches (14 - 30 mm) in front and up.Replacement of wires may be required.

EZ-Fit Bar: Normal balance, more comfortable. Adjusts approximately 0.3 inches (7 mm) in front and up from the normal handle.

EZ-Fit Bar Low: A normal balance for more sports. Adjusts approximately 0.3 inches (7 mm) forward and below the normal handle.

EZ-Fit Bar Plus: Perfect riding posture for Japanese physique. Compact in the large position of the normal handle.

You can use the handlebar weight to get rid of the burden of your hand.

It is said to amplify fine vibrations caused by impacts from driving and engine rotation.

The Ephex Handlebar Weights absorb fine vibrations that transmit to the grip are firmly absorbed by a rubber mounted balancer shaft.

The balancer shaft is made of brass (brass) material, which is often used as a vibration dampening material for acoustic equipment.

Therefore, the Ephex handlebar weights have high vibration suppression and

Reduces vibration than conventional weight increments to the cutting edge of the bar and reduces discomfort and fatigue.

Balancer Weight for EFFEX Handle


Vibration from the engine and road surface transfers to the steering wheel, resulting in discomfort and fatigue.	The traditional weight-type bar end reduces vibrations by converting small vibrations into large vibrations. The vibration itself is not lost.	Brass balancer shaft with excellent vibration dampening properties absorbs vibration from the handle.	Vibration reduction. 2 Bar End Designs for Choice Brass balancer shaft reduces vibration Set for aluminum handle (inner diameter 0.6 inch (14 mm)), and steel handle (inner diameter 0.7 - 0.7 inch (17 - 18 mm)).