[DN15]
Product parameters: Water flow sensor mainly consists of brass valve body, water flow rotor assembly, constant flow assembly, and hole element Install at the inlet end of the water heater to detect the flow rate When water passes through the water flow rotor assembly, the magnetic rotor will rotate and change to linear according to the flow rate Hole sensor outputs the corresponding pulse signal and feedback to the controller. Output: NPN pulse. Signal (if you need to connect to PLC, please contact customer service before ordering) Model: YF-B4 Interface Size: DN15(1/2") Operating Voltage Range: DC 5-18V Material: Brass Media Temperature: -20°C to +100°C Water Resistance: 1.75MPa Output Pulse Height Level: > DC 4.5V (Input Voltage DC 5V) Output Pulse Slow Level: 100M Flow Range : 1 - 25 L/min 3% airtight: close each hole and add water pressure of 1.7Mpa for 1 minute, ensure no leaks or deformation. Flow Rate Pulse Characteristics: F=(11*Q) 3% Q=L/Min Notice: 1. The more you place the order, the more offer you can contact us 2. Package List: Water Sensor * 1. 3. Wiring Mode: Red IN is connected Positive Yellow U signal Output Line Black GND is connected to the negative pole