[F orange]
[F Grey with battery]
MEASURING INSTRUCTIONS:
1. Remove the cap to expose the needle electrode.
2. Turn on the device.
3. Use the "WOOD" button to select the appropriate wood calibration scale A, B, C, D (refer to the wood calibration table in the latter half of this guide).
4. Or press "PAPER/WALL" key to choose Paper Mode or Wall Mode. Paper mode is used to test cardboard/carton. Wall mode is used to test seatlock/wallboard/floor.
4.Push the needle pin into the material and observe the readings.
5. Turn off the device
Specifications:
LCD display with backlight
Principle: Electrical resistance
Resolution: 0.1%
Accuracy: ±0.5%
Electrode Length: 10mm (0.4")
Electrode Pin: Integrated
Auto power off: Approximately 5 minutes later.
Power supply: 2 * AAA batteries
Meter Housing: ABS resin.
Operating Temperature: 0 ~ 40 (32 ~ 104)
Dimension: 145 X 67 X 32mm (5.7" X 2.6" X 1.3")
Weight: 200g (7.0oz)