One Control / Xenagama Tail Loop MKIII - 3 Loop with T.O. and BJF Buffer -
One Control / Zenagama Tail Loop Mark Three Reel Loop with Teo and Byeff Buffer
It doesnt mean that switchers take up the most space for ease of use and maneuverability of the effect board.
The One Control Xenagama Tail Loop MKIII is an incredible leap of pedal board usability with its incredible compactness.
With the Xenagama Tail Loop MKIII, you wont have to waste space in your pedal board without taking up much space in your pedalboard.
This product is particularly space-saving with approximately 1.6 inches (41 mm) depth. The switcher doesnt take up much space inside the board so you can easily add a switcher to your previously setup.
Even though its small, it doesnt compromise on functionality or maneuverability. For example, you can put all the switching of the 2-level effectors on the board, and then power all three effectors and pedal tuners.
This switcher can be used for power supply that takes up extra space.
All jacks are positioned lower, minimizing space depth, while minimizing depth, the width is determined to be maneuverable in order to prevent crawling cables on the board over the effector. This space saver is space-saving, and many players research between the foot switch gives you 52mm extra room to reduce troubles.
In addition, this size switcher makes it incredibly lightweight. It has a very little weight to fit ordinary compact effectors, so it is easy to carry.
All designed for players who use the effectors.
You can also connect multiple effectors to one loop, and you can use one foot switch to control the effectors in the loop in a batch.
All Xenagama Tail Loop MKIII switches are true bypass so pedals such as vintage effectors that may sometimes change sound during bypass can be used as True Bypass
Equipped with a tuner out, the tuner can be completely independent from the system. Not only can it be powered by the loop pedal, but also the tuner.
Also, even if you dont have a tuner connected, the TUNER switch on the right side can be used as a mute switch, which is useful when switching between 2 guitars, during songs and when you dont want to make sound.
Also equipped with BJF Buffer. You can turn it on and off with a switch.
BJF Buffer
Overwhelmingly natural BJF Buffer, covering the image of many "buffers"
Make the gain accurate 1.
In input impedance, do not change the sound.
The output should not be too strong.
The noise should be minimized.
Make sure that the sound is not poor when overloaded.
Meet and complete the requirements of BJFs dedicated buffers, the BJF Bufferer is helping guitar signals at the foot of many professionals around the world.
The more effects the more you connect the later the more effective the bufferer is connected, whereas the more the effect of the first connected. Heres the meaning to incorporate BJF Bufferer into the input. By turning on the BJF Buffer, you can stabilize the overall tone to a warm and natural tone.
Features:
Supports switching of effectors.
Increases operability throughout the board and reduces complicated movements
1 power supply (up to 4 devices, 9 V DC power supply only).
By combining the switches, it reduces the possibility of trouble.
Vintage effectors can be used as True Bypass
Organize your effector board beautifully.
Equipped with BJF Buffer.
Get back to the original ease of your effect board with the One Control Xenagama Tail Loop MKIII.
Effect loops: 3
Tuner out: 1
DC out: 4 (branched from power terminal).
Input Impedance: 500kΩ (Buffer ON)
Output Impedance: 60Ω (Buffer ON)
Size:
9.6 x 1.4 x 1.3 inches (244 x 37 x 32 mm) (not including protrusions)
9.6 x 1.6 x 1.8 inches (244 x 41 x 46 mm) (including protru
Weight: about 310g