A must-have for pedal board building, this is a 2-line model with a DIN connector [MIDI cable] from junction box.
Organize all the input and output of the pedal board in one place for a clean wire finish.
It can shorten the previous setting time and prevent unexpected trouble.
You can also install the included stack plate to raise the height of the main body, avoid the DIN connector from interfering with the edges of the effect board, or stack the 2-line junction box series in your preferred combination.
The fourth picture is for the product set. Other photos are for illustration purposes only.
The 7 photo is approximately 3.3 inches (83 mm) in height (approx. 3.1 inches (80 mm) when removing the top screw), and the left is approximately 2.6 inches (68 mm) in height (approx. 2.6 inches (65 mm) when removing the top screw). Please carefully check the inner dimensions of your pedal board when stacked to use.
■Product Overview
DIN1: DIN Connector [3PIN/5PIN(MIDI)/7PIN/8PIN]
Compatible with pins arranged in a 45 degree arrangement on a concentric circle
DIN2: DIN Connector [3PIN/5PIN(MIDI)/7PIN/8PIN]
Compatible with pins arranged in a 45 degree arrangement on a concentric circle
Product Size (W x H x H): Approx. 2.5 x 2.7 x 1.3 inches (63 x 69 x 32 mm).
Includes protruding parts such as screws.
■How to use
Lines of the same name are connected internally.
There is no direction, so both sides can be used as IN or out.
DIN supports connectors up to 8 pins, including 5-pin MIDI cable.
Passive connection, no signal amplification function.
We cannot guarantee any circumstances due to misuse of this equipment.
Since it is finished by hand, there may be cases of uneven paint or small scratches.
The specifications and appearance of the description may change without prior notice due to purchase or production circumstances.
We make sure to check the operation after your arrival.
If you need a repair, please contact us and we will do our best to help you