[94CMX1.8M×3개 checkered]

[44185×3본 유카]

Iron on Super Strong Plastic Shoji Paper

Increases heating and cooling effect and energy saving. Iron on Shoji Paper

Features:
Plastic is attached between the shoji paper to prevent tearing, and prevent pet scratches.
Improves heating and cooling effect! (compared to breathable shoji paper)
Blocks approximately 95% of ultraviolet rays by UV protection, so it prevents fading and discoloration in the room.
It has a texture like traditional shoji paper.
With just an iron, it can be applied or removed with just one touch.

[Use]
For shoji paste

[Precautions]
This product has an adhesive surface (rough surface).
● If you stick this product as the instructions for use, the pattern will be wrapped around the inside of the room.
Will not adhere to aluminum or plastic shoji frames.
Do not iron too much in the same place.
If it does not stick properly, please cool down the pier once before gluing.
In the event that wrinkles or tarumi occurs, please make sure that the shoji paper is adhered to the pier, and iron it lightly to touch the part or dilute water from both sides and spray evenly with water.
When removing the old shoji paper with commercially available "remover" please rinse it carefully. If there is a "remover" left on the pier, there is a chance to avoid bad adhesion.
This product is made of plastic, so it may sweat.

(Standard) 1 sheet paper width 37.0 inches (94 cm) x length 6.9 ft (1.8 m)
Estimated coverage / Paper width 37.0 inches (94 cm) x length 5.9 ft (1.8 m): 1 piece of shoji
The size of each shoji is based on the shoji frame of 37.0 x 5.9 ft (94 x 1.8 m). (Our company standards)

(Material/Composition)
75% pulp, 20% rayon, 5% vinyl binder, fluorescent agent formula, with special thermal adhesive resin
This product consists of paper, PET, paper, and adhesive layers. The paper content is shown above.

Please be aware that product specifications and design may change without prior notice.