Feature(may vary by option.)

●This PoE/11n wireless AP supports multimedia outlets and supports 2.4 GHz 11 n/g/b for corporations with multimedia outlets
●An AP (access point) allows you to use wireless devices such as laptops and smartphones in any room
●The housing design can be installed in the JIS standard multimedia outlet box, allowing you to install your equipment in a hotel or inn for indoor scenery. It also helps prevent device theft and destruction
●Equipped with a Gigabit compatible LAN port, it is possible to communicate gigabit wired
●Low power saving design with approximately 41% lower than previous models due to the power consumption efficiency. Power consumption: 3.7 W, compared to conventional WAB-S300P: 6.3W

[Router body]





Description

Pattern (type): Router body [Specifications] Wireless LAN part Compliance Standard (International Standard): IEEE802.11n/g/b; Wireless LAN Component Compliance Standard (Domestic Standard): ARIB STD-T66; Wireless LAN Component Frequency Range (Center Frequency): 2.4GHz: 2,400 - 2,484MHz; Wireless LAN Channels: 2 channels: 2,4MHz. .4GHz band: 1 - 13 ch; Wireless LAN Component; Modulation Method: IEEE802.11n: MIMO-OFDM, IEEE802.11g: OFDM, IEEE802.11b: DS-SS; Wireless LAN Communication Type: 2.4GHz; Wireless LAN Component: Antenna: 2 built-in antennas, Wireless LAN Standard Data Communication Speed (Data Communication Speed Value): IEEE 802.11n: Up to 300Mbps, IEEE 802.11a/g: Up to 54Mbps, IEEE 802.11b: Up to 11Mbps; Wireless LAN part; Aerial power supply: Less than 10 mW/MHz; Wireless LAN part; Connection capacity: Up to 25 units; Wireless LAN part certification method: Open system certified; WPA2 (Personal) Wireless LAN Part, Encryption Method: WPA / WPA2: AES, TKIP; Wireless LAN Part; MAC Address Filtering: 64 pieces; Wireless LAN Part; Other Security Functions: SSID Concealing; Sta Separator; Wireless LAN Component; Other Support Functions: Radio Output Adjustment; Wired LAN Component Compliance Standards: IEEE 802.3 10BASE-T, IEEE 802.3 10BASE-T, I. EEE 802 .3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3at/IEEE802.3af Power over Ethernet; Wired LAN Port: 10BASE-T/100BASE-TX/1000BASE-T (RJ-45 type 8-pole connector) x 2 One back port is Po E-Receiving Port), Auto Negotiation / Auto MDI/MDI-X Support; Wired LAN Part; WAN Side Settings: DHCP/Fixed IP/PPPoE (In Router Mode), Wired LAN Side Settings: Access Point Mode: Retrieve/Fixed IP, Router Mode: DHCP Server/Fixed IP; Support Function Tag VLAN (IEE802. Q:Up to 5pcs ■ Support function QoS: bandwidth control■ Management function management protocol: SNMP v1/v2c/v3■ Management function Other: Web UI, logging, backup and restore configuration files, firmware updates, NTP client, WAB-MAT-supported ■ Support client (with wireless connection): Windows 11 / 10 (32bit/64bit) / 8.1 (32bit) bit/64-bit / 8 (32bit/64bit) / 7 (32bit/64bit), MacOS X 10.7/10.8/10.9/10.10/10.11, Android 4.0 or above, iOS 5.0 or later; Compatible browser (with WebUI setting): Internet Explorer 11, Microsoft Edge, Chrome Ver.23.0. Later, Firefox Ver.17 and later, Safari Ver.5 and later; Standards: EMI Standards: VCCI Class B; Standards Safety Standards: IEC61000-4; Standards based on Radio Law: TELEC (Description) JIS standard multimedia outlets that support 2.4 GHz 11n/g/b multimedia outlets. E/11n Wireless AP. ■ An AP (access point) that allows you to use wireless devices such as laptops and smartphones in each room with a communication net that is connected to hotels or inns. ■ The housing design can be installed in JIS standard multimedia outlet box, allowing you to install equipment in consideration of the indoor landscape of hotels and inns. It also helps prevent device theft and destruction. ■ Equipped with a Gigabit compatible LAN port, it is possible to communicate gigabit wired. ■ Low power saving design with approximately 41% lower than previous models due to the power consumption efficiency. Compared to 3.7 W power consumption, the conventional WAB-S300P: 6.3 W product has been utilized to prevent heat generation, and the enclosure is made smaller, so it can be stored in JIS standard multimedia outlets. ■ High quality and reliable for long-term use without worry. ■ Supports PoE power reception function and power supply via LAN cable with data communication, so no power work is required. Allows for flexible installation of devices that are not obstructed by the power source. ■ Compatible with commercial outlet mounting frames (sold separately). Please check our website for model number of the mounting frame that we have confirmed. ■ It can be installed in the full color / wide 21 / advanced series of commonly used faceplates. Please check our website for the model number of faceplates that are compatible with the mounting frames. ■ Comes standard with 3 types of plates that can change the color and port to match the installation location. Fits in a variety of occasions and does not interfere with the interior. ■ Supports "Multi-SSID" managing up to 5 SSIDs with a single wireless access point and can be set authenticated and encrypted per SSID to achieve various security policies in one unit. ■ Compatible with WAB-MAT, the dedicated management software that can be changed to wireless access points in bulk and check operating status. It contributes to significant reduction in the manipulation. The firmware update on the main unit allows for management in both access point and router mode. Compatible firmware: Ver. 5.1.02 and later; WAB-MAT Ver. 4.1.1.6 and later; Comes with a power switch and can be turned off when not in use to reduce power consumption. ■ The front of the unit is equipped with an LED ON/OFF button to turn off the LED easily. This environmentally friendly design allows you to turn off the LED light with a single switch, even in environments that are concerned about light such as bedrooms. ■ Adopts a built-in antenna with strategic positioning so the antenna is not obstructed when installing on the wall, and it is less likely to affect the transmission distance. In addition, it prevents communication failure due to damage to the antenna. ■ In addition to 3 years standard sendback warranty, 2 years with user registration and extended **period. You can use it without worrying about using it in your company. (2 years extension **is a service provided by Elecom Support & Service Co., Ltd. (ESSC). Product inquiry: Elecom General Information Center TEL. 0570-084-465FAX. 0570-050-012 reception time / 10:00 - 19:00