Directions

Direct spraying: Spray directly onto pests.
Spray application: Spray on ants intrusion paths, nest entrances and more. Spray the chemical to the wood near termites until the chemical penetrates well. In addition, please spray it onto the entire surface of the wood in a damp area (bathrooms, kitchens, etc.) with a base, floorboard, wallboard, pillar, etc. that uses termites preferred. Spray on furniture, wallboards, doors, floorboards and more, which are prone to eating from kikimushi.
Injection: For small holes that spill wood powder, or cracks in trees where termites come out, please replace the nozzle as shown in the diagram.
How to reinstall the dedicated nozzle: 1. Pull out the button of the container. 2. Lightly insert the nozzle of the container with your finger and hold the dedicated nozzle into the nozzle. Please do not point the nozzle to your body when replacing it as it may cause fogging gases.
(Includes a convenient gas release cap) Keep out of contact with people or plants while outdoors.
Please contact the customer consultation room of Dainipipon Insect Kikumi Co., Ltd. for disposal of excess cans that have been used in large quantities. Remove the button and insert it into the top of the cap to use it until the end. Please note that the liquid content will be sprayed from the recessed part of the cap

Safety Warning

Please read usage instructions and usage precautions before use.
Precautions for Use:
Caution for Use:
Before use, please read the product description and thoroughly understand before use.
Always follow the specified usage methods.
Those with allergy symptoms such as rash, redness, itchy, rash, rash, etc. should consult a physician or pharmacist before use.
Because it is non-toxic to fish, please be careful not to let atomized particles in ponds or aquariums.
Keep away from skin, eyes, food and drinks, tableware, toys, pets (ornamental fish, aquatic organisms, insects, small birds, etc.), feed, plants, valuables, arts, instruments, and electronic products.
Do not spray toward the human body.
● Spray painted surfaces, plastic, and white wood onto an inconspicuous area prior to use.
If chemicals adhere to textiles such as furniture, fixtures, curtains, etc., there is a chance of discoloration, so be careful not to use.
When exterminating bees, centipede and tire, take sufficient attention to avoid being bitten or bittered, and leave it immediately after injection.
Cautions during and after use.
During the spraying, avoid entering the room for people other than people who are spraying, and after the air is replaced with outside air, before entering the room. In addition, do not inhale mist particles directly.
When the chemical gets on your skin, wash thoroughly with soap and water. If it gets into your eyes, rinse thoroughly with water.
In the event that you experience abnormalities in your body, please tell your doctor that this product is a pyrethroid pesticide and get medical immediately.
After using this product, it becomes slippery until it is dry, so please be careful.
If rain or water is exposed to the spray surface, the effect will be reduced, so please respray it again.
Do not spray continuously for more than 60 seconds.
Storage Notes:
Keep out of reach of children in the car, around the fan heater, etc., in a cool place where children can not reach.
Do not place in areas with water or in places with high humidity, as the can may rust and burst.
When using a dedicated nozzle, replace the original button and cap it to store.
Please be careful not to lose the cap, button, and dedicated nozzle.
Disposal Warning
When disposing, use the gas release cap in a breathable outdoors without a fire, or remove the gas until the sound of the spray is disappeared, and dispose according to local regulations.
Beware of fire and high temperatures: This is a flammable product that uses high pressure gas, so it is dangerous, please follow the following precautions. 1. Do not use near open flames. 2. Do not use large amounts in rooms where fire is being used. 3. There is a danger of bursting when exposed to high temperatures, so keep away from direct sunlight or places where temperature is over 40 or more. 4. Do not put it into fire. 5. Discard after use. High pressure gas: LPG, DME