Feature

●【UPGRADED DESIGN】The foam spray gun is an upgraded version with an added valve to seal the barrel, allowing the user to fully discharge the remaining sealant for true cleanliness. The spring trigger and control knob allow you to control the flow rate, adjust the spray distance to save the form
●No detergent needed: After use, simply turn the valve and the remaining bubbles will be squeezed. No need to spend money on buying detergents or manually cleaning your foam caulk gun. This polyurethane foam gun will help owners save money and time
●[Unclogged and Reusable] Follow the instructions to avoid clogging the foam gun that you use repeatedly. Both the inside and outside of the barrel are treated with PTFE, which is a blocking protection
●【Tools Necessary for Home Improvement】This insulated foam sealing gun is widely used to fill gaps and cracks, seal doors and windows, fill walls and floors (such as air conditioners and bathtubs installation)
●(8 Extension Tubes) In order to fill the gap of different depths, there are 2 types of extension plastic tubes (2.0 and 7.5 inches (5 cm and 19 cm). Simply connect the plastic tube to the top of the metal barrel and start using


Description

Specifications:
- Maximum output pressure: 8 MPa
- Max Flow Rate: 5 L/min


Package List:
1 x Caulking Gun
4 x Long Extension Tubes (19cm)
4 x Short Plastic Tubes (5cm)


Please note:
* Do not point the foam gun to people or animals during operation.
* Wear appropriate protective clothing, gloves, eye or face protector.
* Keep away from children.


Operation Instructions:
1. Open the valve and connect the foam can to the gun inlet and rotate the gun to fix it.
2.Press the trigger to spray.
3. You can adjust the flow rate by rotating the controller.
4.When you finish the spray, we have two options. If you want to remove the foam can, close the valve and press the trigger until the foam is out of the bubble, then remove the foam can. If you want to keep the can installed, please clean the gun with the valve open.