Feature

●The compressor has been upgraded to the latest 2023 model, and its waterproof and cooling effect is also good, so you can continue using the air conditioning in the same manner even on heavy rain
●If you need to customize the length of your A/C pipe, you can purchase your A/C to extend your piping by following link: https://www.amazon.co.jp/dp/B0BWDK9GYR? ref=myi_title_dp ,https://www.amazon.co.jp/gp/product/B09X9SQ8DS
●When the engine is turned off, it activates the parking air conditioner to cool the car and protects the engine from idle. It can be powered by battery or generator instead of burning fuel. 12V DC compressor is safer and quieter than high voltage compressors that operate on inverters. Parking air conditioner with smart system monitors and operates accordingly, reducing energy consumption
●DC Power Supply: DC electric air conditioner uses a highly efficient electric scroll compressor that is powered by an in-car battery. Keeps the cab cool when the engine is off
●To give drivers a good rest and improve traffic safety, our powerful air conditioning system ensures comfortable temperature and humidity, creating an ideal environment for your truck, bus, van, or camper. High quality components set the high quality standards for parking coolers to ensure a long life with minimal maintenance. Electric parking cooler reduces engine idle time and saves fuel Low pressure cutoff ensures engine startup
●12V Air Comparamator: Voltage: 12V DC; Starting Current: 75A, Rated Input: 750W, Cooling Capacity: 1800W, Air Flow: 600 cubic meters per hour; Compressor: DC inverter; Outdoor Unit Size: 20.9 x 15.7 x 7.9 inches (530 x 400 x 200 mm) (19 kg) ; Evaporator Size: 6.6.6.6.6 mm) 5kg
●The outdoor unit can be installed vertically behind the front of the car or horizontally on the roof. Installation is very easy


Description

11
11
11

11

11

11

Outdoor Unit

Adopts an integrated frequency conversion compressor, high density condenser, and super large fan.It is highly efficient and stable, with strong cooling power, large air flow, low noise, and convenient to install.

Indoor Unit

Smart digital panel, rotate 5 vents at any angle for quiet and rapid cooling.In the event of a failure, the code displayed on the panel can be seen on the fault issue.

Remote start

The remote control has a variety of modes.The cooling system can be adjusted according to your needs.You can also control the wind speed of the outdoor fan with the remote control.

11

12 V Parameters

Voltage: DC 12 V Starting Current: 75 A Power: 750 W Cooling Volume: 8875 BTU/1800 W Compressor: Integrated frequency conversion compressor (including frozen oil) Refrigerant Type: R 134 a 600 g Outdoor Unit Size: 530 x 400 x 210 mm (19 kg) *355* 165 mm (6.5 kg) Outdoor Unit Installation Type: (1) Horizontal Mount.(2) Upright Mount Indoor Unit Installation Type: Wall Mount

Precautions

The starting current of the 12 V air conditioner should reach 75 A.Please make sure the battery meets the requirements before purchasing.Vacuum processing (15-20 minutes) before adding refrigerant, and then refrigerant is added.Add R134a/600g because there is no refrigerant inside the air conditioner.Pressure gauge: low pressure 35 psi, high pressure 140-180 psi

Installation Instruction

11

External unit installation: Mark the drill position, drill a hole with 0.3 inch (8 mm) drill, secure the rivet nut to the drill point and attach the damper pad and sleeve to the outer hole, and secure the outer unit to the vehicle.Installing the inflation valve: Remove the iron strip at the evaporator expansion valve position and secure the inflation valve to the evaporator.The two black screws are compatible with two holes, so you dont have to worry about the wrong installation.Then wrapped in black cotton.Install the interior unit: First install the board on the interior wall, then attach the evaporator to the plate.Install high and low pressure pipe: First drill a (2.0 inches (50 mm) hole in the car, then install the rubber cover with three holes.The thick pipe is a low pressure tube and is connected to a compressor.The conduit is a high pressure tube connected to a condenser.After that, the other end of the high and low pressure pipe is passed into the corresponding hole in the indoor unit expansion valve, and the aluminum fittings are sandwiched with black long screws and tins to tighten the screws.Mounting Connection Line: Connect the internal and external connection lines, insert the power wire plug into each other and connect the evaporator drainpipe.Vacuum Pulling/Refrigerant Additive: For 15-20 minutes vacuum pull, and add R 134 a/600 g of refrigerant.Refrigerant can be added according to pressure values.In general, after R 134a refrigerant is injected into the air conditioning system, the low pressure port pressure is 35 psi and the high pressure port pressure is 140-180 psi.Connection Power Line: Connect the power wire to the battery, pay attention to the positive and negative pole, so as to avoid the wrong connectionDo not connect to power off switch and power switch.Turn on the air conditioner: Turn on the air conditioner to see if it is normal.If the current is short, too much refrigerant or running out, the control panel will show a fault code to quickly eliminate the failure.