Product Application:
Three-phase sine wave production. Signal Generator
Interface display and operation steps:
Button Description:
Fun: function key; UP: change the interface downward. DOWN: change the interface upward. ADDITIONAL: Self-Adding Key SUB: Self Decription Key
1. Set the output frequency
Interface Display Font:
First Line "1. Frequency"
Second line "* 1100.0 Hz"
Key operation:
FUN: (Choose the operational bit to set the data) Long press the FUN key to save the parameter value you have set.
Addition: Self-Adding Key;
SUB: Self Decription Key
2. Controls the three phase output voltage
Interface Display Font:
1st line "2. Output voltage"
Second Line "60n"
Key operation:
Set and change the measurement frequency range keys: (left: self-add key)
3. Set the phase difference between phase A and phase B signals (phase A is the reference point)
Interface Display Font:
First Line "3.A-> B Phase"
Second line "120C"
Key operation:
Addition: Self-Adding Key;
SUB: Self Decription Key
4. Set the phase difference between phase A and phase C signals (phase A is the reference point)
Interface Display Font:
First Line "4.A-> C Phase"
Second line "* 1240C"
Key operation:
Addition: Self-Adding Key;
SUB: Self Decription Key
5. Set start/stop output filter
Interface Display Font:
1st Line 5. Filter Set
Second Line "Filter = ON"
Key operation:
Addition: Start/Stop;
Note: (1) Start: The output is connected to the filter capacitor, and the sine wave signal is output.
(2) Stop: The output does not connect the filter capacitor, it will output PWM signal.
5. Wiring
P1 Wire Definition:
1 VDD Module Power Supply Plus (7 V - 12 V)
2GND Module Power Negative Pole.
P2 Wire Definition:
1Q3C phase signal output
2Q2B phase signal output
3Q1A phase signal output
4GND Power Supply Negative Earth Wire.
Package: 1 x HS380 signal generator