Feature(may vary by option.)
●Standard: Single mode single fiber cable, echo loss: ≥52 db insertion loss: ≤0.3 db; Specification UPC; Material PVC; Fiber optic mode SM; Fiber optic specification 9/125 um; Operating wavelength 1310/1550 nm; Operating temperature -40°C to +85°C;
●Caution: All fiber optic fiber is made of glass fiber. Do not bend fiber optic while using fiber optic products. Excessive bending will damage fiber optic
●Applications: Can be used for optical cats/optical terminals/indoors, fiber optic extension lines, and individual melting pigtail lines
●【Compatibility】Compatible with original cables from each company, with almost no difference in line speed
●How to install: 1. Remove the protective caps on both ends. 2. When inserted into the blue plastic projection it will snap into place. 3. Take the cable protection from the same plastic and push it in and snap it into place
[1m yelow]
Description
Fiber optic hopping is used for hopping wires from devices to fiber optic wiring links with a thicker protective layer.
Fiber jumper construction:
The core of fiber optic hopping is a optical propagation glass core.
Single mode fiber core diameter is 8μm to 10μm. Outside the core is surrounded by a glass seal with a lower refractive index than the core and fiber optic is held within the core. In addition, the outside is a thin plastic coat to protect the cover.
Tosei
Low insertion loss; Good repetition; Large echolos; Excellent interconnection; Good temperature stability; Pull
Application
Fiber communication system: Fiber access network; Fiber data transmission; Fiber optic CATV; Local area network (LAN); Test device; Fiber sensor