Window Blindfold Sheet, Window Film, Blindfold Seal, Frosted Glass, Heat Insulation, Heat Insulation, Sweat Resistant, Shatterproof, UV Protection

PYJLBX Frosted Glass Blind, Heat Insulation, UV Protection Glass Film; Material: PVC

● Quick and easy installation with just water.Whats more, they can be reused many times and can be removed and reused for years to come.

● Even beginners can paste it cleanly.Static cling with no glue, glue or tape, easy to remove by hand and leaves no residue when removed.

● Can be applied to any smooth surface.Will not be applied to rough or porous surfaces.

● UV protection and prevents heat from entering.

● Provides excellent blindfold effect while maintaining brightness.

Shatterproof Glass Protection: Prevents injuries from scattering fragments even if the window glass is broken in the event of a typhoon or earthquake.

If you are more than 7.9 inches (20 cm) away, it is difficult to see the room regardless of the weather or day or night.

Blocks out the view from the outside while still allowing enough light to enter into the room.You will be free from dark rooms with a feeling of blockage and cramped when closed.This is a convenient sheet that allows you to turn clear window glass into frosted glass.

PYJLBX Window Blindfold Sheet, Window Glass, Blindfold Sheet, Window Film, Frosted Glass, Thermal Sheet, Window, Blackout Sheet, Glass Film, Sweat Resistant, Shatterproof, UV Protection

● Window Glass Blindfold Sheet Thermal Insulation: Blocks large amounts of harmful UV rays that enter through the glass.

Blocks over 84% of UVA and 99% of UVB rays, softens sunlight and protects the interior, and protects furniture and flooring from discoloration caused by UV rays.

Prevents sunburns and deterioration from the UV rays of floors and upholstery such as flooring, tatami mats, carpets, etc.

In addition, fragments are difficult to scatter even if the glass is broken due to an earthquake or typhoon, and are useful to prevent the occurrence of secondary disasters.The window film keeps the brightness of the interior and softens the glare of the sun so you can work at your computer during the day, reading or studying with ease and reduce eye fatigue.

● Applies to all smooth glass surfaces, such as offices, windows, sliding doors, tables, vases, etc.

It can also be cut and combined, so it is easy to match any size glass.

[Precautions]

● Applies to smooth surfaces.The glass (double layer glass) and meshed glass are also applied regardless of the structure of the content, if the surface is flat (smooth surface).Will not stick to rough or uneven glass.

● Be sure to peel off the protective film (unnecessary film) from the glass film.

Please note that if you skip this procedure, the glass film that you apply will fall off.

If used on the outside of the window, the durability of the product will be shortened, so we do not recommend this product.

During the cold winter season, the film will harden while wound, and it may float if you stick it.The solution is to you, please use a hair dryer to warm up the film and remove it after you apply it.Or soak it in warm water for a while, then stick it when it gets soft.

[Regarding how to stick]

1. Measure the glass and cut it to the desired size of the product (please cut the glass film length and width by about 0.8 inch (2 cm) than the actual size for adjustment).2. Clean the area around the glass and window, and spray the surface of the glass with a large amount of water drips on the surface of the glass (The cleanliness of the glass will affect the finish, so please clean it carefully. )

How to apply film for window glass:

1. Cutting glass film: measure the glass dimensions and cut to the length you need. (Please cut the film about 1.5 cm larger than each size in the length and width). 2. Glass cleaning: wet with water to clean the glass.(Use towels or kitchen paper or squeegee to drain off dirt and water. The cleanliness of the glass will affect the difference in finish.Clean it carefully! 3. Spray on the glass: After cleaning, spray the water solution generously on the glass surface.Fill the mist with water, add 2-3 drops of mild detergent (to make it easy to slip and stick when applied).Spray it as much as you wonder if it seems too much until the water drips off.4. Peel off the protective film (unnecessary film). Note: Please be careful to forget this step.The protective film is attached to the window film itself, so it may not be easy to peel.The cellophane tape (adhesive tape) is attached to both sides and pulled separately, and it can be easily removed.5. Stick the glass film: stick the smooth side of the glass film to the glass.Hold the top of the glass film with both hands.Apply with evenly spaced gaps from the top.Once you finish the glass film, use a squeegee or a credit card or a measuring tape to remove air bubbles and moisture from the middle to the outside.6. Cut the excess off: Use a hard card like a squeegee or credit card, and the cutter is cut with the blade on the side of the glass film.7.Finishing: After use, use towel or kitchen paper to remove moisture.