Feature(may vary by option.)

●Thickness: 0.5 inch (12 mm)
●Thread part = Fine [Pitch: Approx. 0.05 inch (1.25 mm)]
●Note on product images) This is a representative size image. Length of each part such as engraving, thread portion, pitch, etc. varies by size
●Note: Please be sure to check the drawing for the size and other items

[M12 (P=1.25)]

Description

■ Shape: Flanged Hex Nut with Serate
A nut with a seating area larger than two sides on one side of the hex nut, and a serrate on the back of the seat.
The seat is large and has a serate, so the effect of loosening is improved.
Use a tool such as a spanner or wrench to tighten it.

■ Thread Shape: Fine
Finer than the nations most standard pitch (coarse) prescribed by ISO (International Organization for Standardization) standard. Compared to coarse threads, it has a shallow valley and a larger cross-section area which makes it less likely to loose. Please note that there are multiple sizes of pitch depending on the thickness of the screw. Primarily used where precision is required.

■Material: Stainless steel
Most representative stainless steel (equivalent to SUS304)
The strength is almost equal to "iron".
Excellent corrosion resistance and good mechanical properties.
Although it is normally not magnetic, it can harden due to cold processing, and it may cause magnetism.

■Surface treatment: fabric
Surface treatment/plating is untreated.
Therefore, corrosion resistance and appearance are the characteristics and color of the material itself.