Feature

●Caution: When installing the motor, be sure to use the front end cover of the motor to position it and pay attention to tolerances to ensure concentric and load of the motor shaft
●Low Resistance: The resistance value is lower than the same thickness and torque motor. This greatly improves the thermal conductivity of the motor. This can effectively reduce temperature rises and provide stable use
●High Torque: The stepper motor uses high quality motor steel, providing high torque (6.0 n.m), accurate positioning, fast response, light weight, avoids system errors, and low loss stator has better high speed performance
●【Application】This stepping motor can be used in various fields suitable for the control and transmission of industrial motors, such as 3D printers, stage lighting, non-standard equipment, automation equipment, etc
●【Quick Start and Stop】The 2-phase 86 stepper motor can start and stop fast and frequently rotate forward and forward. Segmented drive, high precision, long life, low maintenance cost


Description

Specifications:
Condition: 100% Brand New
Item Type: 2 Phase 86 Stepper Motor
Material: Carbon steel
Color: as picture
Purpose: industrial motor control, transmission occasion
Step angle: 1.8°
Voltage:Determine by the equipped driver, no fixed voltage
Current:4.0A
Holding Torque: 6.0 N.M
Length: 94mm/3.7" (Approx.)
Shaft Type: Milled Keyway
Step angle accuracy: ±5% (full step)
Resistance accuracy: ±10% (20℃)
Inductance accuracy: ±20% (1KHZ)
Temperature rise: Up to 176°F (80°C) (rated current, 2-way electricity)
Environment Temperature: -4°F to 122°F (-20°C to 50°C).
Insulation Resistance: 100 MQMin, 500 VDC
Withstanding Voltage: 500 VAC per minute
Radial Clearance: Maximum 0.02 mm (450 g) load)
Axial Clearance: Maximum 0.08 mm (15.7 oz (450 g) load)
Maximum radial load: 75N (0.8 in (20 mm) from flange surface)
Maximum Axial Load: 15N

Includes:
1 x Two-phase 86 stepping motor

Note:
1. When connecting the motor to the driver, do not connect the wrong phase
2. Due to different operating conditions, the motor may have obvious heat. Motor surface temperature cannot exceed 85°C during operation.
3. When installing the motor, be sure to use the front end cover of the motor to position it and pay attention to the tolerance to ensure the concentration of the motor shaft and load.