How to use:
1. Motor mounting screw hole requires 6 M3 specification screws. 16pcs 19mm mounting hole distance, panel screw holes can be locked to a depth of 5mm, so we recommend using M3 screws less than 8mm for installation. Specific installation status can be determined. Depending on the frame
2. To connect the motor, you need to weld three connecting wires. When you install and connect three cables, please pay attention to the following two points:
A. When using the ESC with sensor, first connect and weld the connection line between the ESC and motor correctly. In other words, you need to properly connect the #A /#B /#C of the ESC and the #A /#B /#C on the motor. Next, use appropriate induction lines and follow the positive direction of the solution, each connected to the motor and ESC induction interface.
B. When using sensorless ESC, there are no line sequence requirements for fixed connection between motor and ESC. For reverse steering you can replace two motor lines
3. Before turning on the remote control car, please carefully check the power system connection accuracy and installation reliability.
Specifications:
Item Type: RC Brushless Motor
Material: Aluminum alloy + copper
Color: Black
Application: For 1/12, 1/14 scale remote control vehicles
Product Size: Motor Diameter: Approx. 1.1 inches (27.8 mm)
Motor Length: Approx. 1.9 inches (47.5 mm) (excluding shaft)
Axle Diameter: Approx. 3.175mm / 1.9in
Shaft Length: Approx. 0.5 in (13.5 mm)
Weight: Approx. 4.4 oz (125 g).
Model: 380-V2S
KV(RPM / Volt): 5000 kV
Output Power: 320W
No-load Current: 7.4 V / 3.5 A
Maximum Current: 75A
Motor T Number: 8.5T
Resistance (Ω): 15.1
Recommended ESC: ESC with 60-160A sensor.
Package List:
1 x Brushless Motor with 380V2S Sensor
1 x Inductance Coil
1 x Manual (English language not guaranteed).