Designed specifically for notebook use.
This smartphone holder is designed and designed specifically for the right hand drive of the Nissan E13 / SNE13 series (2020 (2020) notebook Aura FE13 / FSNE13 series (from August 2021).
Designed to match the interior
Designed to match the console and instrument panels. It is also framed with the color matched to each car and grade instrument panel ornament (except for special car or limited vehicles).
Advantages of installing the center console ◎
Mounting position that does not obstruct your vision while driving.
Depending on the position of attaching the smartphone holder, the front may become difficult to see, or the smartphone screen reflects on the window, making it difficult to see outside of the door mirror or left or right windows. This product mounts to the center console and does not obstruct your vision while driving.
It does not interfere with air conditioner wind, and is gentle on your smartphone.
It does not install in front of the air vent like a typical smartphone holder, so it does not obstruct air conditioner wind. You can comfortably hold air conditioning in hot summer or cold winter days.
In addition, the air conditioner does not hit the air conditioner on your smartphone, so the interior of your smartphone will not sweat.
Cons of installing the center console x
The installation location of the shift knob is "one knuckle" away from the grip.
Installation location is approximately "one knuckle" from shift knob passenger side. Some people find it difficult to remove their smartphone when using it from the drivers seat. Please imagine "1 knuckle" as a guide.
Some passenger passenger passengers may get a bit in the way.
This item is for the passenger side of the center console. Some passenger passengers may get in the way (especially for taller people)
The mounting base is self adhesive, not easy to remove, but the part of the phone holder can be removed from the mounting base.
In addition, the back of the mounting base is attached to the cushion tape so that it does not hurt your feet.
Please consult the passenger frequently passenger before purchasing.
Can hold smartphones of various sizes.
Compatible with smartphones (Width: 2.5 - 3.4 inches (64 - 86 mm); Height: 6.7 inches (170 mm); Thickness: 0.6 inches (15 mm); Weight: 11.8 oz (350 g). Even with a case on, it can be held within the size that can be hold.
Cannot hold smartphone horizontally.
Depending on the shape of the case, the case may not be able to hold the ring securely.
It can hold smartphones with a height of over 6.7 inches (170 mm), but the interior and equipment of the car may interfere with the smartphone.
If there are buttons or functions on the side of your smartphone etc., it may not be used when holding it.
※Depending on the shape of the case, material and strap, the smartphone may be hard to plug and unplug the phone. If this happens, please hold the holder and unplug it while stopping it.
(This product holds the smartphone from the bottom of the smartphone approximately 1.8 - 3.0 inches (45 - 75 mm) with the arm. )
The fixed arm allows you to easily hold your smartphone
If you first set the arm of the holder according to the width of your smartphone, the arm will hold it firmly at its width, so you can easily insert and remove your smartphone.
In addition, the arm is shaped to prevent it from popping out, so you dont have to worry about your smartphone popping out in front of you during sudden brakes.
Easy to adjust ball joint
Features a new construction ball joint. The tilt can be rotated vertically ~ 45° and 90° left and right for a total of 180° rotation.
Also, after adjusting the orientation and tilt of the hold, you can rotate the knob under the holder to fix the position and tilt of the hold part at once.
Can hold while using a charging cable.
The hook that supports your smartphone from the bottom is divided into 2 parts, so you can charge and hold any smartphone with a charging terminal in the center.
Depending on the position of the charging terminal and the thickness of the terminal, it may not be possible to charge while holding it.
Smartphone friendly material selected.
The parts on the left and right arms that touch the smartphone are made of elastomer resin that combines the texture of rubber and high durability. Therefore, it will not rattle even while driving. It will not scratch your smartphone.
It also prevents vibration noise while driving due to contact with the smartphone and holder.
Easy installation without tools (estimated duration: 3 minutes).
Attach the notebook only base to the center console with the adhesive tape on the back of the base. Attach the smartphone holder to the dedicated base. In case of failure to install the dedicated base, an extra set of double-sided tape is also included.
In addition, since it has a special design, it can be installed without scratches or leaving marks on the interior.
● Selected adhesive tape that matches the console
Some people are concerned about the durability of a car in the hot summer when installed with adhesive tape. We use adhesive tape to ensure safety after conducting various tests such as testing that the temperature of the car in the hot sun or testing in the middle of the winter.
In addition, to maximize the performance of the adhesive tape, please clean the installation area with the included degreasing cleaner before installation.
When installing, please use the interior temperature of 59°F to 99°F (15°C to 35°C). Depending on temperature (especially in cold cars) the adhesive tape may not be sufficiently effective.
Compatible with drink holders sold separately.
Compatible with the "NZ816 Note Only Drink Holder Console Mount Silver" holder (sold separately) so you can use a common dedicated base.
If you have the product, you can use the smartphone holder and drink holder according to the situation.