Feature

●(TEC Peltier Element Cooling System) This smartphone cooling fan uses the latest TEC Peltier element cooling system in 2024. It has a cooling area of up to 200% more than a round cooling area on the market, and the 5-leaf turbine fan that cools your smartphone and lowers it to 15 degrees in 1 minute, protecting it from heat es.. When your smartphone heat rises, it will not only degrade the battery and reduce performance, but also cause the worst of the case to malfunction. If you use your smartphone hard, please use the smartphone cooling fan to extend the life of your phone. *The surface that touches your smartphone is cool down → Equipped with a USB Type-C port. Use while connecting a power source that can output at 5V/2A or higher
●Built-in 1,300 mAh High Capacity Battery: The smartphone cooler has a built-in 1,300 mAh rechargeable battery that can cool your smartphone for about 2 hours continuously. It can cool up to 24 hours when connected to a power source via USB. This Peltier smartphone cooler is easy to hold in any position with its built-in battery operated
●Extendable Clip Smartphone Cooling Fan: Comes with an anti-slip design, so you can secure it to your smartphone securely. It is compatible with a wide range of models, and it is compatible with smartphones with a width of 2.4 - 3.6 inches (62 - 92 mm) such as iPhone/Xperia/samsung etc. This solves the problem of the grunet type which is prone to peeling, poor appearance of the magnetic sticker, and the trace of your smartphone cannot be removed cleanly. The smartphone cooling fan size is 3.1 x 1.9 x 1.5 inches (7.9 x 4.9 x 3.8 cm). Weighs approximately 2.8 oz (79.8 g). The large size of an egg is lightweight and does not interfere with your hands. Compact and lightweight cooling cooler, so you can take it with you when you go out, and it is very convenient
●(30 dB Quiet and RBG Light) Uses a 5-leaf turbine fan that rotates 9,000 per minute, and the noise level is approximately 30 dB. Low vibration, not interfere with gaming or listening to music. Comes with 3 color RBG lights for a stylish look. It is not just a smart phone cooling fan but also a fashion item
●[Precautions and Package Contents] (1) Please use a power source that can output at least 5V/2A. Lower than this standard, the product will not work properly or meet the expected heat dissipation effect. (2) Remove the case to enhance the cooling effect of outdoor use. (3) If condensation occurs on the surface of the cooler during use, this is a normal phenomenon, so you dont have to worry about it. Wipe with soft cloth (4) Please fully charge it before use. (5) Avoid the violent collision. (6) Do not block the fan vent when using. Package Contents: Smartphone cooling fan x 1, 4.6 ft (1.2 m) cable x 1, Japanese instruction manual x 1

Description

Smartphone Cooling Fan, Peltier Element, 1 Second Rapid Cooling 1,300 mAh High Capacity Battery, Built-in Smartphone, 30 dB Quiet, Small, Lightweight, Extendable Clip, Compatible with iPhone Android 5 - 7.8 inch models, so your hands wont get in the way.

Smartphone Cooling Fan

■ Just stick it on and cool! A smartphone cooling fan that can be used repeatedly by preventing the heat of your smartphone.

■ Prevents smartphone heat rising when watching games, videos, shooting or quick charging.

■ Prevents smartphone malfunctions such as "dull" or "forced end" due to heat generation, and can be used comfortably.

■ Adopts the 2024 TEC Peltier element cooling system, which increases 200% from the market round cooling area with a cooling area of 35 cm and cools your smartphone with a 5-leaf turbine fan that rotates 9000 per minute, and cools your smartphone to 15 degrees Celsius in 1 minute, protecting it from heat es.. Based on our testing results comparing the increase in temperature while charging and video shooting in the device body at a temperature of 77°F (25°C).

■ 1300 mAh rechargeable built-in battery can cool your smartphone continuously for about 2 hours.

■ Approximately 3.1 x 1.9 x 1.5 inches (7.9 x 4.9 x 3.8 cm) small, weighs approximately 2.9 oz (79.8 g) and is lightweight enough to not hinder your hand operation.Compact and lightweight cooling cooler, so you can take it with you when you go out, and it is very convenient.

Note:

■ Please use a power source that can output at 5V/2A or higher. Lower than this standard, the product will not work properly or meet the expected heat dissipation effect.

■ If condensation occurs on the cooler surface during use, this is a normal phenomenon, so you dont have to worry about it.Wipe with soft cloth

■ Please fully charge before use.

■Avoid strong impact.

■ Please do not block the fan vent when using.

Useful for:

Use the smartphone with a high load capacity while charging your smartphone. Use your smartphone for a long time.

When your smartphone heat rises, it will not only degrade the battery and reduce performance, but also cause the worst of the case to malfunction.If you use your smartphone hard, please use the smartphone cooling fan to extend the life of your phone.


Smartphone cooling fan with 1,300 mAh rechargeable built-in battery allows you to cool your smartphone continuously for about 2 hours.It can cool up to 24 hours when connected to a power source via USB.	The noise level is about 30dB and is very quiet.Low vibration, not interfere with gaming or listening to music.	This product is designed to cool smartphones that are prone to heat when engaging in heavy duty work, such as playing games and watching videos.


Compatible with smartphones with a cooling area of 13.8 - 3.7 inches (35 - 35 cm), a width of 2.6 - 3.7 inches (67 - 95 mm), a thickness of 0.2Protects against heat explosion.	Colorful lights make you look stylish.Compact and lightweight smartphone cooler, so you can take it with you when you go out, and it is very convenient.	It has a non-slip feature so you can clip it firmly to your smartphone.Adopts semiconductor cooling technology for excellent cooling performance.