[M10×35 (P=1.25)]

■ Head Shape: Hex Apse Set with Flange
The hexagonal head has a round dump on the top of the head with a conical brim, called a flange. The head seat side has a flange to prevent the seat from recessing into the other material.
Tighten using a tool such as a spanner, wrench, etc.

■ Thread Shape: Fine [Full screw]
Finer than the nations most standard pitch (coarse) prescribed by ISO (International Organization for Standardization) standard. Compared to coarse threads, it has a shallow valley and a larger cross-section area which makes it less likely to loose. Please note that there are multiple sizes of pitch depending on the thickness of the screw. Primarily used where precision is required.
In addition, the "full screw" is the shape of all the threads from the tip of the head to the head seat.

■Material: Stainless steel
Most representative stainless steel (equivalent to SUS304)
The strength is almost equal to "iron".
Excellent corrosion resistance and good mechanical properties.
Although it is normally not magnetic, it can harden due to cold processing, and it may cause magnetism.

■Surface treatment: fabric
Surface treatment/plating is untreated.
Therefore, corrosion resistance and appearance are the characteristics and color of the material itself.

Product Features:
The one-piece design eliminates the hassle of preparing washers. (You dont have to worry about forgetting to put it on.)
The flat diameter of products with a nominal diameter of M8 and above are standard because the flange allows the seat to be large and there is no need to be larger on the bolt itself.
The seat has a large reception area, so it prevents the seat from recessing.
2 types have tapered flanges. (One type has no tapered flange. )