[8K@60Hz | 3 inputs | 1 output]
[Black]
4K HDMI Switcher with 3 in 1 Output HDMI Cable 4K@60HZ, HDCP2.2, HDMI2.0, RGB(YUV:4:4)
This 3x1 HDMI pigtail switch has a keepless switch function that allows you to connect up to 3 HDMI input signal devices to your TV, monitor, or projector.
Features:
1.With 1 meter HDMI output cable.
2. No power supply needed.
3. Connect 3 meters HDMI 2.0 cable (max) and support 4K@60Hz HDCP 1.4.
4.Connect 2 meters HDMI 2.0 cable (max) and support 4K@60Hz HDCP 2.2.
5. Support 12-bit deep color.
6.High performance up to 18Gbps
7.Plug and Play
Troubleshooting Guide:
1.Q: If there is only one HDMI signal source, the output device has no automatic switch or signal.
A: For some devices, the HDMI switch may not work if only one input device is turned on, because the power is insufficient. In this case, turn on two or three source devices.
2. Q: The image is not clearly displayed on the HDMI display.
A: Each cable connected to this device must be less than 16 feet (5 meters) with a standard V1.4 19 pin HDMI cable.
3.Q: There is a picture and sound interference between the HDMI display.
A: First, make sure the connection is correct. And make sure there is a source interference near this HDMI switch, or if there is a cable used to connect a power cable, etc. Adjust (lower) resolution of input devices to enhance data transfer efficiency.
4.Q: Pictures are ok, but the sound will fall off.
A: Please turn on the HDMI audio output of input HDMI devices.
5.Q: No sound on the display.
A: There may be some compatibility issues. Lower the resolution of HDMI input source.