For motorcycles, motorcycles, molecules and scooters master cylinders
Check Window for Brake Fluid Reservoir Tank
When it gets old, it will crack and leak the fluid.
You can only replace the window for such inspection windows.
Fits 18mm window diameter
5mm thick.
Rubber gasket included
The replacement procedure
Remove the master cylinder and remove the old peek window.
Push the edge of the window inside and pry to break the window from the outside and lift the edge. Avoid damaging the master body.
Clean the areas with the window.
Remove the burr of the new sight glass, set the seal and press the new window.
Insert it in parallel with press machine, vice, C clamp, etc.
It will not get in when it gets diagonally and pushes it all the way down while adjusting it, such as pushing the other side.
Check whether the fluid is leak proof and remove the air.
*Beginners will find it difficult to work with.
Brake Fluid Check Window, Master Cylinder Sight Glass, Inspection Window, Peek Window, Set of 2
*:--☆--:*:--☆--:*--☆--:*:--☆--:*:--☆--:*:--☆--:*