Feature

●7 Color Switchable, 10 Emitting Patterns, Memory Function: This upgrade car door lamp uses 6 SMD high brightness RGB chips, and has 7 different luminous colors: pink, purple, blue, green, ice blue, red, yellow, and white. It can be used instead of courtesy lamps, also includes steady on, alternating red warning light mode, 7 color gradations and 7 color slow-flashing lighting modes. Short press the power button in the middle of the door lamp to switch on and mode and long press to turn off (red light flashes twice and then turns off). It has a memory function to memorize the last luminous pattern, so you dont have to set it repeatedly. Excellent visibility, very visible in rear cars in the dark, making it easy to alert you and help prevent chasing at night. You can also light up your feet with a crisp light
●(Infrared Sensor Operation Principle, Automatic Opening and Closing) This upgraded car door warning light uses a highly sensitive infrared sensor, which will shine when you open the door, and turn off when the door is closed. Compared to door lights that turn off with a conventional magnetic switch, it is much easier to use. No need to worry about finding a place to turn on or off the LED car door lamp. Note: The door light can stay lit for more than 8 hours
●(USB-C Rechargeable, Long Operation, Continuous Lighting) Built-in 400 mAh high capacity battery and Type-C charging terminal, which makes charging faster and more convenient. The port includes a waterproof and dustproof cover, so you dont have to worry about using it on rainy days. Charging time is about 70 minutes Durable and can be used for about 60 days on a full charge. It can be used as an emergency light at night
●(0.9 cm) Ultra-thin 2S Magnet Mounting) Lightweight and thin, the overall thickness including the metal plate is only 0.37 inches (0.95 cm), the size is 4.0 x 1.3 x 0.3 inches (10.2 x 3.2 x 0.9 cm), and weighs 1.0 oz (28 g). Universal type, suitable for most car door and trunk gap, better fit for the car, not affect the opening and closing of the door, increase safety. The back of the LED door warning light has two powerful neodymium magnets which can be easily adsorbed and will stick instantly to any iron surface and not easy to fall off. No wiring is required, so it can be easily installed in cars that do not have door courtesy lamps. It is recommended for easy installation and easy customization. (*Because the magnet is on the outside, please be careful that the magnet will not fall off when removing the door lamp. )
●(High versatility, no logo design) The combination of a comfortable black exterior and acrylic mirror provides a stylish look and a comfortable touch. No special logo design, luminous colors are clearer, clearer, more luxury, and more practical. It is relatively bright, suitable for most cars, it can be installed without worry, so you can get a night car with confidence


Description

▼Product Specifications:
✧Product Name: Upgraded 7 Color Luminous Car Door Warning Light Courtesy Lamp
✧LED Type: RGB LED Chip
✧Number of Bubbles: 6 SMD
✧Size: 4.0 x 1.3 x 0.3 inches (10.2 x 3.2 x 0.9 cm) / 1.0
✧Emitting Colors: Pink Purple Purple, Blue, Green, Ice Blue, Red, Yellow (Lemon Yellow), White and Red Alternating Flashing
✧Emitting Pattern: Steady On, 7 Color Graduation, Multicolor Slow Flashing, Multicolor Flashing
✧Operating Method: Infrared sensor
✧Installation Method: Magnetic
✧Charging Port: USB-C Rechargeable Red when charging, Blue when fully charged.
✧Charging Time: Approx. 70 minutes
✧Operation: Short press to switch on/off color and mode and long press 2S to turn off. (2 red flashing times)
✧Infrared Sensor Detection Distance:
Auto Off: Approx. 0.4 - 1.2 inches (1 - 3
Automatic ON → Over 1.6 inches (4 cm)
✧Package Includes: (2 pieces/4 pieces)
Car door lamp, metal plate (double-sided tape included) 2 infrared sensor stickers (enhanced sensor), USB-C charging cable
▼ If the sensor is defective, you can adjust it according to the following method.
1. If the sensitivity of the sensor will decrease if it is not sufficient (Countermeasures: test again after a full charge).
2. If it is not detected even after full charge (Note:Move the included sensing sticker to the lamp sensing position and test if the lamp is automatically turned on and off)
After trying the above methods, if the sensing is still defective, there is a possibility of initial failure. In that case, please contact MAZERO at any time. After confirming our store, we will resend a new door lamp at no charge.
▼Caution:
1. Please charge this product before first use.
2. If power is not sufficient, it may be prone to poor infrared sensing. This is a normal phenomenon. Just full charge the car door lamp and it will work properly.
3. Press and hold the power button 2S to turn off. Short press to switch on/off color and light mode (*Red flashing 2 times off).
4. The magnet is on the outside side, so please be careful that the magnet will not fall off when removing the door lamp.
5. Always turn on the light before testing the functionality.
6, Suitable for most car door gap, please check the door and vehicle side clearance (about 1cm or more) before ordering.
6.Door gap may be narrow in some vehicles. We recommend you install the lamp on the side of the door to prevent the door scratching, but the light source may not be exposed to the ground.
7. MAZERO popular LED door lamp with 1 year warranty. If you have any problems with quality or other problems when you receive the product, please feel free to contact us by email. We will respond quickly and provide you with a satisfactory solution.