Feature
●Genuine Shimano Reel Custom Parts
Description
This is a genuine line roller installed on Shimano 16 Stradic CI4+, 17 Complex CI4+, 17 Sepia CI4+.
|
|
|
|
|
|---|---|---|---|
|
|
The 16 Stradic CI4+, 17 Complex CI4+, 17 Sepia CI4+ line rollers feature a core protection feature that integrates the line roller body and line roller bearings. For this reason, if the bearing wears out and you want to replace it, you can only replace the line roller. (*Due to this mechanism, bearings may not be added.) Use as a spare part for maintenance of 16 Stradic CI4+, 17 Complex CI4+, 17 Sepia CI4+. Quantity: 1 |
■Compatible models17 Sepia Ci4+ (C3000S, C3000SHG, C3000SDH, C3000SDHHG) 17 complex CI4+ (C2500S F4, C2500S F4 HG, 2500S F6, 2500S F6 HG ) |
16 Stradic CI4+ (C2000S, C2000HGS, C2500S, C2500HGS, 2500S, 2500HGS, 2500HGSDH, C3000, C3000HG, C3000HGM, 3000XGM, 4000XGM) |
■Installation method
|
|
|
|
|
|---|---|---|---|
All replacement of the original line rollers are similar in structure, so we will explain 14 Stella as an example.First, remove the bolts that hold the line roller. |
Depending on the condition of the reel, there may be some adhesion, so please be careful not to crush the threads when removing it. |
Note:Depending on the type of reel, the threads may be minus and torque.Make sure you have the right screwdriver for your reel. |
Remove the screws to remove a total of 6 parts. We will replace the line roller with a brand new one. |
|
|
|
|
|
|---|---|---|---|
|
After replacing the new line roller, we will put the parts in order of the numbers above. |
Install (1) parts first. This part is oriented to be mounted, so please make sure to install it correctly according to the shape. |
After installation, hold the (1) part with your finger until you finish working. Please note that if the parts are loosened and the parts are moved, they cannot be installed correctly. |
Install (2) parts. |
|
|
|
|
|
|---|---|---|---|
|
Install (3) Line Roller Body |
|
For line rollers installation. If you look at the side of the line roller, you will notice that the width of each side of the groove is different.Install the narrow one on the bail and the wider side toward the fixed bolt. |
Install (4) parts. |
|
|
|
|
|
|---|---|---|---|
|
Install (5) plates. |
Lift the arm and insert the (1) tip neatly and bolt it into place. |
If you have no problems, you will be done.Finally, make sure the parts are installed properly and the line roller that you installed will rotate properly. |
|
