Feature(may vary by option.)

●Product Size: 11.8 x 9.8 inches (30 x
●Weight: 0.4 oz (12.5 g)
●Accessories: Application squeegee
●Material: Film/PET, squeegee/polyethylene
●Made in Japan
●Applicable Surfaces: Mirror and glass surfaces (mirrors and glass, etc.)
●The anti-fog effect is about 1 year, but the effect may be disappear quickly in humid and dirty areas

[300×250mm Anti-fog film (large)]

[Diameter 200 x 45mm Frame mirror suction cup type]

[Diameter 131 x 60mm Frame mirror suction cup type]

[295×215×2mm Panel mirror special adsorption sheet type]

[295×215×5mm Panel Mirror Magnetic Type]

[215×145×2mm Panel mirror special suction sheet type]

[200×150mm Anti-fog film (small)]

[295×215×5mm Panel Mirror Adhesive Type]

Description

It will not fog up even in the steam of your bathroom or bathroom. The anti-fog effect is about 1 year, but the effect may quickly disappear in places with high humidity and dirt. By creating a water film on the surface of the film, it is effective in preventing fog. If you cannot feel the anti-fog effect, please wet the surface. Silicone adhesive type fog-free film for easy and clean application. Leaves no residue If the film becomes dirty, the anti-fog effect will decrease in the process. In this case, use a mild soap or mild soap on a soft sponge or fingertips, and lightly wash it off with water.

From the Manufacturer

Made in Japan Bath Lid, Sanitary Supplies, Manufacturer Topre Co., Ltd.

Manufacturers and distributors sanitary accessories such as bath lids, slatoes, and mirrors.

All processes from planning, development, manufacturing, assembly, quality control and shipment are produced in Japan at our own factory and cooperative factories.

We provide products that are made with high quality products that are more secure, secure, and easy to use than those who want a comfortable space.

Topre Anti-Fog Mirror Safety Plus Series


Frame Mirror Round frame mirror for easy installation with suction cups You can change the angle of the mirror freely. 5.2 inches (131 mm) (FAP-731) comes with a shaver hook. Choose from 2 sizes: Φ5.2 inches (131 mm) and Φ7.9 inches (200 mm).	Panel Mirror Easy to install panel mirror Installation methods include adhesive tape and magnet. You can choose which depending on the location you are installed. Size is both 11.6 x 8.5 x 0.2 inches (295 x 215 x 5 mm).	Anti-Fog Film Easy Waterless Application Fog Free Film The silicone adhesive is repositionable and leaves no residue when removed. Choose from 2 sizes (length 7.9 x width 5.9 x height 9.8 inches (200 x 150 x 300 x 250 mm). Use according to your mirror size.

Features of Anti-Fog Film Safety Plus


Keeps it from fogging even in steam. Clear film that prevents fogging of ordinary mirrors. It will not foggy in the bathroom or bathroom. By creating a water film on the surface of the film, it is effective in preventing fog. Slowly peel off the film from the corners when not in use.	Easy to install without water New silicone adhesive for easy installation without water Silicone adhesive type fog-free film for easy and clean application. Repositionable & leaves no residue	Please follow the instructions and use the correct installation. The anti-fog effect is about 1 year, but the effect may be disappear quickly in humid and dirty areas. If you cannot feel the anti-fog effect, please wet the surface.

How to apply the film that does not fog.


Installation Instructions 1. 1. Clean the surface to be installed. Wipe off dirt, moisture, oil and oil on the surface and dry thoroughly.	Installation Instruction 2 2. Peel off the backing film a little. Peel off the backing film (transparent) of the non-fogging film about 2.0 inches (5 cm) and fold it to the bottom. The backing film is larger than non-fog, and is easier to remove. Please do not remove the surface protective film (blue color) until the end.	Installation Instructions 3. 3. Stick the film to the mirror. The side of the backing film is peeled off to become the surface where it is applied. Determine the position of sticking, and softly press onto the mirror.Slowly pull the backing film down to the mirror surface and press the film you do not want to lift and stick it to the mirror. If some air gets in place, please peel off the backing film, stop it, deflate and reposition it.Use the included squeegee to deflate.Small air bubbles about 0.08 - 0.12 inches (2 - 3 mm) will naturally deflate in about 2 - 3 days.	Installation Instructions 4. 4. Peel off the surface protective film (blue). Please peel off the surface protective film by turning the backside sticker from the corners. Please be careful not to peel off the film that does not fog.


	FAP-711 (Panel Mirror Adhesive Type)	FAP-712 (Panel Mirror Magnet Type)	FAP-731 (frame mirror Φ131)	FAP-732 (frame mirror Φ200)	FAP-751 (Small film that does not fog)	FAP-752 (Large)

Customer Reviews	1,003	1,003	1,003	1,003	1,003	1,003
Price	¥3,092	¥3,291	¥1,322	¥2,418	¥697	¥1,656
Product Size	Height 11.6 x Width 8.5 x Thickness 0.2 inches (295 x 215 x	Height 11.6 x Width 8.5 x Thickness 0.2 inches (295 x 215 x	Diameter 5.2 inches (131 mm) x Depth 2.4 inches (	Diameter 7.9 x Depth 1.8 inches (200 x 45	Height 7.9 x Width 5.9 x Thickness 0.02 inches (200 x 150 x 0.05 mm).	Height 11.8 x Width 9.8 x Thickness 0.02 inches (300 x 250 x 0.05 mm)
Product Weight:	Approx. 10.2 oz (290	Approx. 11.8 oz (320	Approx. 2.6 oz (75	Approx. 4.6 oz (135 g).	About 5.0g	About 12.5g
Installation Instruction	Adhesive tape (applied to the product)	Magnet (attached to the product)	Suction cup (suction cup auxiliary sticker included).	Suction cup (suction cup auxiliary sticker included).	Silicone Adhesive (Squeegee Included)	Silicone Adhesive (Squeegee Included)