An evolution down block with a variety of functions. "
By making the down-block necessary when lowering the high ace, we completely overcome the shortcomings that conventional products cannot match. The block body is made of A6061 aluminum extruded material with excellent light and rigidity, and is finished with high precision cutting and shot blasting and black anodized finish. In addition, it is equipped with a conical shape of the center pin. Combined with the "Surface Lock U-Bolts" which boast extreme holding power to achieve a perfect fit. Furthermore, the axle guide suppresses the shaking of the axle housing (thrust angle) caused by a forward and forward misalignment, supporting stable straightness in any road conditions. In addition, the offset axles are adjusted to the center of the car body and are equipped with a "centering" function that allows you to set the exquisite pronged position. Each 0.5 inch (12.5mm) down volume can be set up to 7 different sizes to make sure you get the desired car height.
The height of the car will change by about 1.0 inch (25 mm). This product complies with safety standards, but please be aware that the judgment of inspectors should be prioritized. This product comes with a VIA (Japan Vehicle Inspection Association) issued with a "strength test certificate" issued by the Japan Vehicle Inspection Association. By presenting it during vehicle inspection and structure changes, you can safely test it. For lowdown of 1.6 inches (40 mm) or more than listed in the vehicle verification height, "structural change" is required