Feature(may vary by option.)
●【High Precision USB C Watt Checker】This USB C Tester Ammeter Voltmeter Tester can measure voltage, current, power, capacity, energy, timing, temperature and record maximum voltage, current, and power values. It has the same precision as large professional equipment and can display voltage and current curves in real time
●【Support almost all Type-C protocols testing】This USB C cable checker can measure voltage up to 48V in PD2.0, PD3.0, PPD, QC2.0, QC3.0, FCP, SCPAFC, PE, ASH VOOC, SuperVOOC, PD3.1 protocol. Supports two-way measurement Easily check the charging status and speed of your device
●【6 Display Modes and Touch Control】This USB C tester has high resolution color screen and can display 6 interfaces. You can switch between modes by touching the button on the screen. Also, the screen automatically rotates 360 degrees according to the gravity sensor, making it convenient to view from different angles
●【Offline Storage and Battery Capacity Calculation】This USB multimeter can store data when offline and display historical data when online. You can also calculate the capacity of your mobile battery and various types of batteries. You can use it to test the performance and condition of your battery and charger
●【Auto Screen Off and Wide Compatibility】This USB C checker can automatically turn off the screen when there is no current, so you can save power and extend the service life. Compatible with various devices with Type-C port such as laptops, tablets, phones, power banks, chargers and more. An essential tool for testing and monitoring your devices
[검은색]
[로즈골드]
[그레이]
Description
Parameter:
Operating Voltage: DC 4.5-50V
Working current: 0~6A (short time peak 13A)
Power consumption: <0.15W
Power display: 0~600W
Sampling Resistance: 0.001R
Power display: 0~9999WH
Capacity Display: 0 - 9999 mAh
Operating Temperature: 0°C to 45°C / 32°F to 113°F
Product Dimensions: 43mm * 36mm * 10mm
Q1: Why does it display the product just plug it into the charger?
A1: Most Type-C ports on the charger do not have voltage output by default. Therefore, this product does not supply power or display it. The charger only output voltage when load protocol is detected, and at that point it will be displayed on the product.
Q2: Why the test meter can not measure 10A or 120W as shown on the product charger?
A2: The value measured by this product is the real-time charging parameter during the charging process. The parameters shown on the charger represent the maximum power parameters of the product and are not always output.
Q3: Why the output will sometimes display a current of 0.01~0.02A when the load is not connected?
A3: This product uses bi-directional current detection, so it is normal to generate minor idle current. However, it can be reset to zero by quickly touching the screen three times with the current clearing interface.