Feature(may vary by option.)
●■Product Number: 1520 ■ Compatible Size: Diameter 0.3 - 0.3 inch (7.0 - 7.5 mm) glue
●■ Set Includes: Glue gun body Glue gun stand Glue sticks 10 19.5cm or 25cm 8 Japanese instruction manual Clear case Cosmetic box for glue gun stand ※ Glue sticks can be either 10 x 19.5cm or 8 x 25cm. Same capacity. Please note that you cannot choose this item. Please refer to the images for sizes
●■Material: Main unit, Stand: Plastic ■Voltage: AC 100V ■Temperature: Approx. 180° ■Frequency: 50/60Hz ■Product Power: 20W
●■ Applications: Artificial flowers, decorations, metal, wood, paper, cloth, plastic, toy models, DIY (DIY), electronic wiring boards ■How to use: 1, insert a wire stand into the glue gun body 2, Diameter 7.0 mm - 7.5 mm glue stick (back-sealing) from the back of the glue gun body 3, Put the power supply and preheat for 3-5 minutes, then pull the trigger to make the glue (adhesive) ※ Glue inserted into the main unit. Do not remove the stick. If you cant use it, please keep it inserted. In that case, if the glue is too long to fit in the case, it is recommended to fold it and store it as it does not fit. ★ The glue remaining inside the main unit may take time to melt and may only come out slightly after use. Turn on the power and turn it off slowly and preheat it for 3-5 minutes before using. Continuous usage time is about 10-30 minutes
●■ Low Temperature Glue Stick: Because this is a high temperature type glue gun, it may melt away if you use a low temperature glue stick. Turn off the power if any liquid occurs
●■Note: *There may be small scratches or stains. The case may have dirt, burrs, or small scratches. ·There may be stains on the package. This is an inevitable phenomenon during the manufacturing process. - About glue gun- Do not use glue sticks that do not fit size or type. It may damage the main unit. During use, the nozzle around the main body and the melted adhesive will become very hot. Please be careful not to touch it directly as there is a risk of burns. Do not point the nozzle up while in use. The liquid melted may break the reverse sink. When using new glue sticks for the first time, there is a possibility that there is a chance of a little smoke, but this is a normal phenomenon. Please rest assured that the smoke will not be released in about 30 minutes
●- About the stand: ·The silicone part may become sticky during manufacturing and packaging. It is difficult to pack in perfect condition and we hope you can buy it after your understanding. The anti-slip gasket (suction cup) may not stick to the surface depending on the material of the desk. Colors and sizes may vary depending on the production lot. ·Images cannot represent 100% the same color. Actual product may vary from image. Please read the enclosed instruction manual carefully before using the product. We cannot accept returns or exchanges for the above reasons. Thank you for your understanding
[Glue Gun Body & Stand | Set of 10 Glue]
[Glue Gun Stand Only]
[Glue gun body only]
Description
Designed to be difficult to drip and the thin nozzle improves the efficiency of fine work.
Hand switch type that can be turned on and off at your fingertips for easy operation.
The stand has a non-slip seal that prevents it from slipping or clinging, providing excellent stability.
A set of 10 super strong long glue sticks that can be used as soon as it arrives.
Resists yellowing and has exceptional clarity that does not interfere with your artwork.
The starter set is a complete set that provides high cost performance and is recommended for beginners who are handmade to use.
(*The set of glue sticks can be either 10 long 7.7 inches (19.5 cm) or 8 Mega Long 9.8 inches (25 cm).Both have the same capacity.Please note that you cannot choose this item. )
MYMAMAS DIFFERENCE
|
|
|
|
|---|---|---|
|
Say goodbye to the frustration of dripping! Designed to be difficult to drip and the thin nozzle makes it easy to use for detailed work. Matte finish adds a stylish look |
Make the glue gun more comfortable and more convenient. Comes with a non-slip seal that provides excellent stability without slipping or clinging. The nozzle is made of silicone material that can be easily removed even if the glue sticks to it. Perfect for trial projects. |
A set of 10 long 7.7 inches (19.5 cm) super strong adhesive glue sticks. It is resistant to yellowing, and has a high transparency, so it wont stand out even when you protrude it.Great for practice. |
