Wireless Chime, Sensor.
Operating Principle: When the motion-sensing transmitter detects movement, the receiver will notify you with a light and a chime sound.
Recommended Locations: Front doors, exits and entrances of places such as stores, noisy places such as factories and warehouses. Can also be used for purposes such as nursing care for seniors and people with disabilities.
Product Specifications:
1. Receiver Operating Voltage: 110 - 240 V.
2. Transmitter Operating Voltage: 4.5 V (3 AAA batteries).
3. Operating Range: Approx. 76.6 yards (70 m) (in environments in which it is not covered, and can be seen with an unobstructed straight-line view).
*The listed signal range is a theoretical value.Range may vary depending on the conditions and environment.
4. Batteries: 3 AAA batteries (sold separately).
5. Transmitter Detection Range: 9.8 - 23.0 feet (3 - 7 m).
6. Sensing Angle: 15° vertical, 100° horizontal.
7. Receiver Dimensions: 3.0 x 3.1 x 1.3 inches (76 x 80 x 33 mm).
8. Transmitter Dimensions: 3.1 x 2.3 x 1.8 inches (80 x 59 x 45 mm).
9. Package Dimensions: 6.9 x 4.3 x 3.0 inches (17.5 x 11 x 7.5 cm).
10. Weight: 0.5 lbs (0.22 kg).
11. Color: White.
12. Operating Ambient Temperature: 32 - 104 °F (0 - 40 °C).
Pairing Procedure:
How to Pair:
1. Power the transmitter using a micro USB cable. (If the transmitter and receiver have not been paired, when the sensor detects motion, the indicator light on the transmitter will light up in red, but the receiver will not respond.)
2. Press and hold the volume control button until the light on the receiver turns on and stays on.
3. After that, the light will turn off.This indicates that the pairing is complete.
4. The sensor can now function properly.
Undoing Pairing:
While pressing the volume control button, plug the receiver into the outlet. (Press and hold while the light is lit constantly in blue until it blinks and then turns off.)
This will undo the pairing.
Issue: The sensor does not resond/does not work even with batteries inserted.
1. Make sure the power switch on the transmitter is turned on.
2. If the transmitter does not function properly when powered by batteries, try powering it with a micro USB cable.
3. Check to ensure that the receiver is working by pressing its melody selection and volume control buttons.
If the receiver is functioning without issues, check the pairing status (step 4 below).
4. Check to ensure that the receiver and transmitter have been paired successfully.
If you are unable to pair the devices successfully, please refer to the “About Pairing” section above.
Issue: The device is responding unusually; the chime rings all the time.
Try un-pairing and re-pairing the receiver and transmitter.
Please refer to the “Pairing Procedure” section above.
Package Contents:
Receiver x 1.
Transmitter x 1.
Instruction manual (English language not guaranteed) x 1.
Installation set x 1.