Feature(may vary by option.)

●Size:300mm
●Weight: 2.8 lbs (1.08 kg)
●Manufacturer Part Number: R-103-1
●Material: Carbon steel
●The 50 is especially effective on soft surfaces and sandy beaches

[11.8 inches (30 cm)   &  6]





Description



From the Manufacturer



Solid Stakes Use 4 Different Length PegsSolid Stakes Use 4 Different Length Pegs

Use 4 different lengths of pegs depending on the condition of the ground and gears.

The solid stake length ranges from 20cm to 50cm in 10cm increments.

You can choose between the main 2 ropes of tarp for 40, 30 for sub and 20 for tent reinforcement, and so on depending on the condition of the gear and ground you are set.

The 50 is especially effective on soft surfaces and sandy beaches.

Features

Solid Stake Head ShapeSolid Stake Head Shape

Solid Stake Round HoleSolid Stake Round Hole

Solid Stake Head Dig into the Ground and Hook Stakes into the GroundSolid Stake Head Dig into the Ground and Hook Stakes into the Ground

The head shape of the hammer is a cylindrical shape, so the hammer does not slip when hitting, and the impact force is transmitted to the body, making it strong and steady.

The round holes are designed to catch the peghammer Pro hooks for convenient removal from the ground.

When the head digges into the ground, the hook will stick to the ground, so the stake will not rotate and the rope will not fall out.

MAINTENANCE

Solid Stake Bends and RepairsSolid Stake Bends and Repairs

Solid Stake Clean After UseSolid Stake Clean After Use

Solid Stake Stake Stays Securely For Your Next TimeSolid Stake Stake Stays Securely For Your Next Time

If you bend it, you can knock it and fix it.

Even with strong pegs it may bend.If that happens, you can fix it by hitting it on a stone.

Clean up stains after use

After use, remove dirt and grasses, and thoroughly wipe away water.

Secure storage for the next time

It is convenient to keep pegs and hammers.Sure to be useful next time.

Manufacturing Process

Solid Stake Manufacturing Process 1Solid Stake Manufacturing Process 1

Solid Stake Manufacturing Process 2Solid Stake Manufacturing Process 2

Solid Stake Manufacturing Process 3Solid Stake Manufacturing Process 3

Solid Stake Manufacturing Process 4Solid Stake Manufacturing Process 4

Steel 55C steel with high heat treatment

If you place the rod steel on the belt and slowly dive in a furnace about 1,100 degrees, the bright red steel comes out from the furnace.

Hammer Press

The steel from the furnace will fly the film together with the sparks and transfer to the press machine while it is not cold.

Trimming Process

The powerful force of the solid stake hammer press has been hammered several times to create a prototype.You can make 2 solid 30 pieces from one piece of steel.

Black Electrodeposition Paint

Trim to remove excess part of the mold.If you drill a round hole in the back of the head, then apply a black electrodeposition coating, the strongest pegs are created.