[Set of 2 Blue]
[Set of 2 Red]
[Silver Set of 2]
[Set of 2 Black]
Push pins for securing external hoods, etc.
This is a set of 2 black types with a diameter of 1.3 inches (32 mm), and the length of the screw is approximately 3.9 inches (10
Recommended for use when the hook is not suitable after replacing it with an aerobic hood.
Drilling holes for mounting is required on the fixed side (hood) so please install it with tools such as hole saw or specialty store.
In addition, the 0.2 inch (6 mm) diameter bolt hole is required on the receiver side (engine compartment), so if your car does not have a screw stay, you will need to install or drill holes in your car.
Please be aware that the instruction manual and **card are not included.