Product Specifications:
Color: White
Operating voltage: DC24V only
Current Consumption / Power Consumption: 144 W
Waterproof: Waterproof silicone tube
LED: SMD5050
LED Quantity: 600 LEDs (5M)
Tape Width: 0.7 inches (18 mm)
Tape thickness: 0.2 inch (4 mm)
Tape Length: 16.4 ft (5 m)
Set Includes:
1 x LED tape (16.4 ft (5 m)
This LED tape uses [SMD5050] chips and uses a 2-row type rather than a series of previous models, making it a high-class LED tape with a brightness and light output that is far superior to the general LED tape.
It also has a very high amount of light, so it can be used for boat lighting.
The LED tape itself is soft so it can be installed in a certain degree of freedom.
The LED tape is 2.0 inches (5 cm) wide and has a cut line, so it can be cut. (If you use the LED tape after cutting, you will need a soldering iron. )
The connection method can be turned on by simply connecting the positive and negative connection.
Working voltage is 24v, so it can be connected to marine or truck.
Please note that the operating voltage is 24 V only.
[Precautions]
Instruction manual not included.
The back of the tape does not come with double-sided tape.
Please use with regulated voltage and current.
If you use it outside of the regulations, it may cause damage to the product or accidents such as fire.
Please do not light up while the LED tape is rolled up.
If you bend it forcefully, there is a risk of contact failure, so we cannot deal with defects due to excessive bending.
Please note that there may be slight color differences depending on the production lot.
When cutting, be sure to turn off the power supply, as it may be damaged by short circuit.
The LED has polarity. If it does not light up, please install it in the reverse direction.
The wiring part is not waterproof. It is waterproof, but if you use it in a wet place, please check it thoroughly after yourself.