Feature(may vary by option.)
●Uses Cirrus Logic CS43198 DAC chip for 384 kHz/32 bit and DSD256 playback: The K11 uses the Cirrus Logics DAC chip "CS43198", which has low power consumption and excellent audio characteristics. The CS43198 is a Master HIFI DAC that achieves the strictest standards of the company to provide true recording. By adopting this chip, it achieves a performance of S/N ratio: over 123dB and THD+N:0.00035%
●(1,400 mW output with a fully balanced headphone amplifier circuit) In K11, the fully balanced configuration of the headphone amplifier circuit, and a total of 2 units per left and right channel, the balance output is 1,400 mW at 32 Ω load and 250 mW. In addition, to suppress the power supply circuit design that adversely affects sound quality, each block of the circuit, it uses a power supply circuit design. Power supplied from a 12V external power supply is maintained clean by a low-noise LDO responsible for each block, each is adjusted to the proper amount and is supplied to the components
●(3-stage gain control supports a wide range of playback environments from IMM to headphones) The K11 can be adjusted from 3 levels of gains (High), Mid, and Low. You can adjust the gain according to the efficiency of the headphones and headphones to enjoy music at a comfortable volume level
●(Various Inputs and Outputs, Can be Used in the Center of Audio System) The K11 supports digital inputs using USB terminals, RCA coaxial terminals, square optical terminals, analog output using RCA terminals, and balanced output using single end output using 6.35 mm headphone terminals and 0.2 inch (4.4 mm) terminals. Not only is it connected to your PC, you can connect it with a variety of digital devices to enjoy music with a high-quality balanced connection or easily incorporate it into your existing audio system
●(An intuitive change of the function of the main unit by the display and knob on the front) In K11, the FIIO fixed headphone amplifier has been adopted a display on the front. High contrast, durable VA display provides good visibility and stays lit without burning Visually check the sampling rate, volume, gain and output mode. It is used to turn the power on/off, switch each input, control menus, adjust volume, and other operations. Push the knob twice quickly to select the headphone output/RCA output, and each output can remember the last volume. You can choose the right output mode for each connection to an active speaker or connect to an external amplifier as a pure DAC
●RGB indicator light on top of the main logo: The FIlO logo on the top of the K11 body is illuminated by RGB lighting, allowing you to quickly identify your current audio sampling rate. Brightness, color, and light patterns are all adjustable by knobs
●(Sleek and simple housing design and black and silver 2 colors) The K11 is assembled with high strength aluminum alloy material carefully processed. The height is about 1.3 inches (32 mm) and the width is 5.6 inches (143 mm) so it can be installed neatly on a desk. Black and silver two colors, you can choose according to your preference
[Silver]
[Black]
Description
The K11 is an entry model of small stationary DAC headphone amplifier with a slim body, rich input and output. FIIO has developed many years of continuous evolution, the K-Series built-in desktop DAC headphone amplifier has been completely new body design with the latest model K11, combined with uncompromising audio playback quality with fully balanced headphone amplifier circuit. This is a high performance device that can be used to intuitively operate the main unit with an LCD display.