Product Number:
E00022 Spare Tire Moving Bracket for Forward Moving Straight Up JB64
【Price】
Price is 29,480 yen (including tax)
Compatible models:
Jimney JB64
Product Description:
Bracket allows spare tire to be mounted in facing out position and moving vertically.
Even with large diameter tires (225/75R16, etc.), it can be attached to prevent interference with the straight bumper spoiler.
106mm moving upward
The structure has been revised and has passed safety standards even in the JB64.
Vehicle inspections are done without the need for complicated structural modification.
It is positioned on the left and right center of the rear gate for a balanced look.
You can also attach aluminum wheels that match the foot circumference, which increases the overall exterior.
The wheel is mounted with 3 nuts. Requires 3 separate wheel nuts. You cannot use genuine nuts that are used when facing out.
Rubber to prevent tire shake
Not for use with Showa Garage LED Number Move Kit. Please note:
(About Car Inspection)
Spare tire brackets have been used by the Department of Transportation (at the time) for handling changes such as structural changes, etc. (Department of Transportation) (Department of Transportation Commitment) (November 16, 2017, 2017, the Department of Transportation Department of Transportation and Transportation Administration Autonomy No. 234, and 26262 2 2 2. Not included.
Therefore, if the dimensions normally fit within light vehicle standards, or do not fit, you will need to register it as a regular car registration procedure such as changes in structure.
Conventional brackets that attach spare tires facing facing facing out is not possible to avoid thicker than factory spare tire brackets due to the vehicle and wheel construction.
As a result, if the vehicle dimensions exceed light vehicle specifications and passes the vehicle inspection, you will need to follow the instructions and registration as the above mentioned above.
This is the "Car Inspection Compatible, Spare Tire Moving Bracket for Forward Facing JB64" developed by Showwa Garage to solve these problems by separating the bracket between the base and the tire mounting part.
By bolting the base to the rear gate, the tire mount part is easily attached to the base and can be easily removed without any tools, the total length of the vehicle is considered to be the dimensions including the base only. The base is less thick than the factory spare tire brackets, and the dimensions of the vehicle are not increased, so it fits well within the standard of light vehicles and can pass through vehicle inspections without any trouble.
[Precautions]
Requires 3 separate wheel nuts to secure the aluminum wheel to the bracket. You cannot use genuine nuts that are used when facing out.
Both of the Showa Garage LED Number Transfer Kit with or without holes cannot be used in combination with this product. Please note:
Stock may run out of stock depending on timing. If you need a rush order, please check it before purchasing.