Feature

●(Easy Installation) G1/2 male thread (exit) and female thread (inlet) water pressure generates ultra-fine bubbles, so there is no need for power supply, and the cartridge can be used almost no need for replacements or maintenance
●(2024 upgrade) 45% lighter than previous products, and 26% smaller in size of fine bubbles has been increased
●【Ultra Fine Bubble】 It produces both ultra fine bubbles and micro bubbles, which can absorb dirt and odors and gently wash them. Breeze 2 produces up to 160.4 million ultra-fine bubbles of 94.1 nano. The total value of the ultra fine bubbles and microbubbles included per 0.04 fl oz (1 ml) (depending on water quality and environment, etc.). The maximum value of the 5 measurements average (water temperature of 17.4 °C ± 0.6 °C / average value of approximately 5.86 million pieces) Measured using NanoSight NS300 by a third party. The amount of bubble is measured before and after Bonheur water flow is incurred. By combining external air suction to the cavitation system, it produces a stable amount of bubbles
●[Features] Can be incorporated as a plumbing material (intended for use in architectural applications such as water pipes inside the water meter). This product uses fine bubble water to cultivate and promote growth of plants
●Water saving: Approximately 35% water saving effect. Made of sturdy metal with no power required, you can enjoy ultra fine bubbles


Description

Specifications: Compatible fluid: water; Normal use pressure: less than 0.4 MPa; Maximum operating pressure: 1.0 MPa; Fluid temperature: 32°F - 122°F (0°C - 50°C) (unfreezed); Environment temperature: 32°F - 122°F (0°C - 50°C); Composition: Material: Main body brass + plating, generator SUS, O-ring NBR Dimensions: 2.0.0.0.1 inches (51 mm) x 1 inches (26 mm) x 136 oz (136 g). 10.2 oz (290 g). Size: 2.0 x 1.0 inches (51 x 26 mm); Cosmetic box size: L 6.3 x W 3.9 x H 2.0 inches (160 x 100 x 50 mm); Mounting diameter: G1/2 (female screw out male screw); Water flow instructions in female thread: G1/2 Out: G1/2. No expensive pump tank needed. No danger of pulling power into your bathroom. Easy to install by anyone. It will soften the hot water. The frustration of water pressure reduction has also been kept to a minimum. It is also directly connected to the shower hose, so you can use your current shower head as it is. If your current shower faucet is [INAX, SAN-EI, KAKUDAI, MYM, YUKO], it can be installed directly without an adapter. If your current shower is [TOTO, KVK and (Balance Cooker) Made by Tokyo Gas, Rinnai, please use a separate adapter to attach to the shower hose. If you need an adapter that is included between BRISE and the faucet, you must need a separate adapter between the BRISE and the shower hose. This is not available in our company, so please purchase a suitable adapter at a hardware store. If the connection diameter is G1/2, it can be directly installed without an adapter. Recommended Water Pressure: Water discharge with the shower head facing up and the water will blow over 1.5 meters high.