Feature(may vary by option.)
●1 Standard Tension Stick Module and Driver for Astro C40 TR Controller
●Replace the left-stick or right stick if there is a failure
●Use the included screwdriver to remove the base module and replace the stick module. Plastic housing and stick levers flush the existing people
●Reset must be required after installation. Resetting method: Rotate the left stick 3 times at the same time, hold the reset button to the left (counterclockwise) and hold the right stick 3 times at the same time, and hold the reset button to vibrate, then hold and hold it again, then shake to complete the reset
●Warranty is 1 month from date of order. Installation Notes: 1: Before installation, please clean the contact point of the circuit board module and the C40 controller. There may be cases where the contact poor contact caused by small dust may cause the stick to operate or drifting. 2): Tightening the screws on the faceplate (right up => bottom left => lower right => upper left sequence), too tightening the screws may cause the stick to work. 3): You can also replace the left and right modules. If you have any questions: please contact support@epindon.com
[Standard tension]
Description
Package includes:
●C40 TR Standard Tension Joystick Module X 1 (Base part only)
T6 screwdriver x 1