Pin definition:
3V3-----Input power supply voltage (3.3,5V is recommended, not recommended)
GDN -----Ground Point
SIO_C-- -SCCB interface control clock (Note: Some low-level microcontrollers require pull-up control as well as I2C interface)
SIO_D --- SCCB interface serial data input (output) side (Note: for some low-level microcontrollers, pull-up control, similar to I2C interface)
VSYNC ---Frame synchronous signal (output signal)
HREF ----Line synchronous signal (output signal)
PCLK ----Pixel Clock (Output Signal)
D0-D7 ---Data port (output signal)
RESTE ---Reset port (normal use pull-up)
PWDN ----Power consumption selection mode (normal use) If you have fifo, please contact us
Key Parameter:
(1)Photo Receptor Array 640X480;
(2) IO voltage 2.5V to 3.0V (internal LDO power 1.8V to core)
(3) Power operation: 60mW / 15fps VGAYUV;
(4)Sleep<20μA;
(5) Temperature operation: -30°C to 70°C;
(6) Stable operation 0°C to 50°C; (7) Output format (8bit)? YUV / YCbCr4:2:2 RGB565 / 555/44 GRB4:2:2 Raw RGB Data Light
(8) Size 1/6"
(9) Field of View: 25°
(10) Max rms rate 30fps VGA sensitivity 1.3V /(Lux-sec);
(11) 46 dB signal to noise ratio;
(12) Dynamic Range 52dB
(13) Browsing Modes Per Line;
>(14) Electronic exposure 1 line to 510 lines;
(15) Pixel Area 3.6μmx 3.6μm;
(16) Dark current 12 mV / s at 60°C;
Package included:
2 * OV7670 640x480 0.3Mega 300KP VGA CMOS Camera Module