Compatible with thick bags such as tea, coffee bean bags, and healthy foods.

Seal width 0.2 inches (5 mm), Seal length 13.8 inches (350 mm), Total thickness 0.02 inches (0.4 mm).

Primarily recommended for many professional seals.

Examples of welding

Aluminum vapor-deposited bags (tea bags) and gussets can be welded (0.02 inch (0.4 mm) thick).

Holds up to refill bags for tea leaves

Examples of melting

Because the fused seal is cut at the same time as the seal, there is almost no width of the seal, so please use it in shrink packaging.

When using a knob of 4 or more to adjust the heating time, the crimping pad, fluorine resin tape, and heater wear will increase.

1. Setting

Adjust the heating time according to the material and thickness of the bag, and adjust the temperature with the knob to match the position you want to seal.

2. Push down the handle

The knob position 6 is approximately 3 seconds.

3. Welding

The red pilot lamp disappears, take cooling time for 1-2 seconds and raise the handle.

Move the cutter handle to the cutting position.

Turn the cutter handle 90° while holding down the handle.

Slide the cutter handle while holding down the handle and cut out the desired part.After use, release the cutter handle and raise the handle.

Please be careful when using a cutter, so as not to cut your fingers.