Product Description: Product Specifications: Contents: 1 piece set, 1 piece scraper. Size: Width approx. 0.4 inches (1 cm) x Length approx. 9.8 inches (2.5 m). Product Details: "Frame Cover for built-in stove tops. One size fits most. 0.4 inches (1 cm) x 8.2 ft (2.5 m). This is a frame cover that can be installed and removed with built-in type induction or gas stoves. One size fits all that can be installed on stoves up to 29.5 inches (75 cm) wide, and features a clear color that blends naturally into your kitchen. Comes with a scraper to remove dirt from the edges of the edges. Directions for Use: This product prevents stains from getting into the gap of the built-in stove edge. Before Use: Before using: Please use a scraper or a hookkin to clean near the edges and edges as the product will become difficult to install if there is oil or moisture. Remove dirt well and dry before installing. Start point: Please peel off the film from the back and start sticking. Point 1: Peel off the film about 2.0 inches (5 cm), and attach the peeled surface to the countertop or confly. Please do not remove the film at a time and remove it a little by one. Point 2: Adjust the position of the product between the edge of the stove and the countertop. ● Clean stick tips: The straight part is lightly pulled to the next corner to adjust the position and stick it at once. Attach it all around, over 2.0 inches (5 cm) at the starting part and firmly press it down tightly and then cut the excess part with scissors. Caution: Cannot be installed near the bottom of the edges or if the edges are dirty or wet. Heat resistant temperature: (body) 244°F (110°C); Caution: (disclaimer) Please read Caution: Please be sure to read. In addition, please understand that the estimated delivery date of Amazon and the estimated delivery date of our product may vary. Product packaging may change without prior notice. ※We cannot accept returns due to customers preferences