Feature(may vary by option.)

●This PoE/11ac wireless AP is compatible with multimedia outlets and supports up to 433 Mbps (standard theoretical value)
●An AP (access point) allows you to use wireless devices such as laptops and smartphones in any room
●The housing design can be installed in the JIS standard multimedia outlet box, allowing you to install your equipment in a hotel or inn for indoor scenery. It also helps prevent device theft and destruction
●The 5 GHz band (11ac/n/a) is resistant to radio interference at up to 433 Mbps, and the 2.4 GHz band (11 n/g/b), which is a highly popular communication range of up to 300 Mbps. (Standard)
●Equipped with a Gigabit compatible LAN port, it is possible to communicate gigabit wired

[Router body]





Description

Pattern (type): Router body [Specifications] Wireless LAN part Compliance standard (international standard): IEEE802.11ac/n/a, IEEE802.11n/g/b; Wireless LAN part compliance standard (domestic standard): ARIB STD-T66, ARIB STD-T71; Wireless LAN part frequency range (center frequency): 24. GHz: 2,4 00 - 2,484 MHz, 5 GHz: 5,150 - 5,725 MHz; Wireless LAN Component Channels: 2.4 GHz Bands: 1 - 13 ch; 5 GHz Bands: 36, 40, 44, 48, 52, 56, 60, 64, 1004, 108, 111112, 112, 112 0,124 128, 132, 136, 140 ch; Wireless LAN Component; Modulation Method: IEEE802.11ac/n: MIMO-OFDM, IEEE802.11a/g: OFDM, IEEE802.11b: DS-SS; Wireless LAN Communication Type: 2.4 GHz and 5 GHz Simultaneous Communication LAN Part Antenna: 2 built-in antennas (2.4 GHz dedicated x 1, 2.4 GHz/5 GHz x1); Wireless LAN part; Data transmission speed (standard): IEEE 802.11ac: up to 433 Mbps, IEEE 802.11 n (2.4 GHz): up to 300 Mbps, IEEE 802.111 N (5 GHz max. 50Mbps, IEEE 802.11a/g: up to 54Mbps, IEEE 802.11b: up to 11Mbps; Wireless LAN part; Aerial line power: 10 mW/MHz; Wireless LAN part; Number of connections: Up to 50 devices (2.4GHz: 25, 5GHz: 25), 5GHz, or less recommended 25GHz. Total number) Wireless LAN Component Certification Method: Open System Certification, WPA2 (PERSONALIZED); Wireless LAN Part; Encryption Method: WPA / WPA2: AES, TKIP; Wireless LAN Part; MAC Address Filtering: 128 pieces (2.4 GHz: 64 pieces, 5 GHz: 64 pieces); Wireless LAN Part and other security features: SSID concealator. Wireless LAN Component Other Support Functions: Radio output adjustment; Wired LAN part Compliant Standards: IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3at/IEEE802.3af Power over Ethernet; Wired LAN. Ports: 10B. ASE-T/100BASE-TX/1000BASE-T (RJ-45 type 8 pole connector) x 2 (1 port on the back is PoE charging port), Auto negotiation / Auto MDI/MDI-X compatible; Wired LAN part; WAN side setting: DHCP/fixed IP/PPPoE (in router mode); Wired LAN side setting: Access point Mode: DHCP Retrieve from / fixed IP; Router Mode: DHCP server/fixed IP; Support function tag VLAN (IEE802.1Q): up to 10 pieces (2.4GHz: 5 pieces, 5GHz: 5 pieces); Support function QoS: bandcontrol ■ Management function management protocol: SNMP v1/v2c/v3; Management function Other: Web UI, Logging. Backup and restore files , firmware updates, NTP client, supports WAB-MAT; Supported clients (with wireless connection): Windows 11 / 10 (32bit/64bit) / 8.1 (32bit/64bit) / 8 (32bit/64bit), MacOS X 10.7/10.8/10.9/10.9/10.0.0.0.0.0.0.0.0.0.0. 10/10 .11, Android 4.0 or later, iOS 5.0 or later; Compatible browser (with WebUI): Internet Explorer 11, Microsoft Edge, Chrome Ver.23.0 or later, Firefox Ver.17 or later, Safari Ver.5 or later; Standards EMI Standard: VCCI Class B. Standards: IEC61000-4. Standards: Based on radio wave law. Technical Standards: TELEC (Description) • Can be installed and replaced with JIS standard multimedia outlets, and is PoE/11ac wireless AP for corporations that support up to 433 Mbps (standard theoretical value). ■ An AP (access point) that allows you to use wireless devices such as laptops and smartphones in each room with a communication net that is connected to hotels or inns. ■ The housing design can be installed in JIS standard multimedia outlet box, allowing you to install equipment in consideration of the indoor landscape of hotels and inns. It also helps prevent device theft and destruction. ■ The 5GHz band (11ac/n/a) is resistant to radio interference at up to 433Mbps, and the 2.4GHz band (11n/g/b), which is a highly popular communication range of up to 300 Mbps. (Standard value) Equipped with a Gigabit compatible LAN port, it is possible to communicate gigabit wired. ■ Low power saving design with approximately 41% lower than previous models due to the power consumption efficiency. 5.1 W power consumption, compared to conventional WAB-S1167P: 8.7 W. This product has been utilized to prevent heat generation, and the enclosure is made smaller, so it can be stored in JIS standard multimedia outlets. ■ High quality and reliable for long-term use without worry. ■ Supports PoE power reception function and power supply via LAN cable with data communication, so no power work is required. Allows for flexible installation of devices that are not obstructed by the power source. ■ Compatible with commercial outlet mounting frames (sold separately). Please check our website for model number of the mounting frame that we have confirmed. ■ It can be installed in the full color / wide 21 / advanced series of commonly used faceplates. Please check our website for the model number of faceplates that are compatible with the mounting frames. ■ Comes standard with 3 types of plates that can change the color and port to match the installation location. Fits in a variety of occasions and does not interfere with the interior. ■ Supports "Multi SSID" managing SSID with up to 10 (2.4GH/5GHz) of a single wireless access point and can be set up for authentication and cryptography per SSID to achieve a variety of security policies in one unit. ■ Compatible with WAB-MAT, the dedicated management software that can be changed to wireless access points in bulk and check operating status. It contributes to significant reduction in the manipulation. The firmware update on the main unit allows for management in both access point and router mode. Compatible firmware: Ver. 5.1.03 and later; WAB-MAT Ver. 4.1.1.6 and later; Comes with a power switch and can be turned off when not in use to reduce power consumption. ■ The front of the unit is equipped with an LED ON/OFF button to turn off the LED easily. This environmentally friendly design allows you to turn off the LED light with a single switch, even in environments that are concerned about light such as bedrooms. ■ Adopts a built-in antenna with strategic positioning so the antenna is not obstructed when installing on the wall, and it is less likely to affect the transmission distance. In addition, it prevents communication failure due to damage to the antenna. ■ In addition to 3 years standard sendback warranty, 2 years with user registration and extended **period. You can use it without worrying about using it in your company. (2 years extension **is a service provided by Elecom Support & Service Co., Ltd. (ESSC). Product inquiry: Elecom General Information Center TEL. 0570-084-465FAX. 0570-050-012 reception time / 10:00 - 19:00