Useful in these situations • When white lines and crinkles begin to come out • If the color is funny or unusual when the nozzle checks • Regular maintenance of the printhead • Refillable with a new manufacturer ink • Use the cleaning solution at room temperature. • Please ventilate it and work in clothing or places that do not have problems with stains. • Always wear gloves • Use high absorbent quality paper such as kitchen paperIf the paper or fiber is too fine, it may get into the printer. • After using the cleaning fluid, always clean the head at least one time to properly remove the liquid remaining on the printhead • If print quality does not improve after cleaning, please use a cleaning solution to leave it left for a while and restart your printer.Please be aware that ink may take several hours to properly melt and may require immediate printing.

• Operate your printer to enter "cartridge replacement" mode. • Unplug the printer power cord from the outlet. • Remove all cartridges • Attach the rubber tube (package comes with 3mm and 4mm size tubes, please use appropriate tube for your printer) or refill needles (also included in the package) to the infuser • For each ink color, repeat the following steps: Use the infuser to remove 2ml of cleaning solution. Slowly press the piston of the injector to fill the cleaning fluid. • Wait a few minutes for the dry ink on the printhead to melt. • Remove absorbent paperBe careful that the ink may drip off when you remove it. • Restores all cartridges • Plug the power cord into the outlet, turn on the printer and wait for it to work • Run head cleaning using printer utility. Example: For Windows 7, 1. Start button, 2. Device and printer, 3. Click printer icon, 4. Click print setting, 5. Select Utility, 6. Click the Head Cleaning button. • Print nozzle check pattern using printer utility to see results (You can print by pressing the [Nozzle Check] button on the screen of the 6 above.)

• Remove cartridge from printer • Prepare a little larger container to clean cartridges. • Wait a few minutes for the dry ink to dissolve. • Take out the cartridge and gently wipe the printhead with absorbent paper.Please be aware that the ink leaks. • Attach the cartridge to your printer. • Wait for your printer to work • Run head cleaning using the utility of your printer. • Print nozzle check pattern to see results

• Turn your printer into "cartridge replacement" mode • Unplug the printer power cord from the outlet. • Prepare a little larger container to clean cartridges. • Remove cartridge from printer, then remove printhead • Place the printhead on wet area with absorbent paper cleaning fluid. • Wait a few minutes for the dry ink to dissolve. • Hold the printhead and wipe it carefully with absorbent paper. • Attach the printhead to your printer. • Install the ink cartridge on the printhead • Plug the power cord into the outlet, turn on the printer and wait for it to work • Run head cleaning using printer utility. • Print nozzle check pattern to see results