[1 red]
[1 Gold box]
Product Description:
1. This induction heating circuit uses 12-54V low voltage DC power supply, maximum input.
The current is 20A, the maximum power is 1000W, and the long-term power is 500-800W. That
Can be used for heat treatment of small parts such as tempering and annealed by DIY players. Also,
Used to refine gold, silver, copper, aluminum and other metals. Enamels are retainable
Gold is about 300 grams and silver or copper is about 150 grams
2. This circuit can directly heat carbon steel, graphite, stainless steel, copper, aluminum and titanium.
Alloy and other materials You must contact the owner to customize the specific heating parameters.
Special Heating Ring
Size parameter:
Heating plate PCB size: 10x10cm
Voltage heating effect:
24V may melt lead or tin
36V can melt aluminum.
48V can melt gold, silver, copper with helium
PREVENTION:
1. If the circuit is continuously working, add a cooling fan from the top
Cools resonance capacitors, magnetic rings and other components.
2. When using a switching power supply, please be aware that it is a high output power supply.
Generally, it has a slow start function, and the output voltage slowly rises after the power is loaded.
If the inductive heating circuit is turned on before the voltage rises to 10V, then this is for the following reasons:
When the starting voltage is not sufficient, the 2 MOS tubes will turn on
Bake components at the same time. So add a switch between the power supply.
Switch the heating circuit first. After 3 seconds or 5 seconds of power on, the voltage will
When stabilized, the switch is turned on and the inductive heating circuit is connected.