Feature
●Maximum Output: 5 W + 5 W (RMS) at 8 ohms load
●Compatible Load Impedance: 8 Ω ~ 16 Ω
●Frequency response: 20 Hz ~ 20 kHz
●Total Harmonic Distortion: Less than 0.1% (1W output, 8 Ω load, 1 kHz)
Description
Product Description
D.I.Y. Personal Amplifier with a pair of Konpakt sizes that are the best fit for a pair of ski-car
Safety Warning
Do not use in places where water is directly exposed to the device. Also, please do not use it in an abnormal condition
Legal Disclaimer
Please refer to the instruction manual included
From the Manufacturer
The card size housing is compact and has high quality sound quality.
AP05mk2 is a personal amplifier with 5W + 5W output that can easily ring D.I.Y. speakers.By adding further improvements to the popular previous model, we have achieved clearer and better balanced sound.The large volume knob is located in the center for easy adjustment, combined with a compact steel housing for a simple yet convenient design.
Automatic standby feature to automatically reduce power consumption.
When the input in this unit continues to be non-signal or nearby signal level, it will automatically switch to standby mode and reduce power consumption to less than 0.5W.In addition, this function can be set to either turn the function on or off by the dip switch on the bottom to suit the environment or the usage of the device, or the time until it is standby by by by the time.
Main Specifications
| Maximum output | 5W + 5W |
| Compatible Load Impedance | 8 Ω ~ 16 Ω |
| Frequency Response | 20 Hz ~ 20 kHz |
| Total Harmonic Distortion Ratio | Less than 0.1% (1W output, 8 Ω load, 1 kHz) |
| S/N Ratio | 80 dB or above (A-weighted) |
| INPUT | Terminal Stereo Mini Jack, Input Sensitivity: 630 mV |
| Power Supply | DC 12 V (Includes Dedicated AC Adapter) |
| Power Consumption | 22W (Max), less than 0.5W (Standby) |
| External Dimensions | 4.3 inches (110 mm) (W) x 1.2 inches (30 mm) (H) x 3.0 inches (75 mm) (D) *Includes the maximum protrusion object. |
| Product Weight: | About 200g |
| Accessories | 1 x AC adapter, 2 x speaker cables, 1 x stereo mini cable (0.8 m) |
Exterior Dimensions Diagram
Please do not use a power source other than the AC adapter that comes with this device.
Please directly connect the 8-16 ohm impedance speaker and speaker system to one output.
Devices that can connect to the output of this unit are passive speaker units or speaker systems that do not have an amplifier.Do not connect any input or output of other devices (such as amplifiers).
Depending on the output noise level of the playback device connected to the input terminal, the automatic standby function may not work properly.
Standby mode may work when the players side volume is lowered or used with a discreet (low volume).In that case, it may be improved by raising the volume of the player.
Turn the power on and off with a power switch that can be used as both volume and volume of the device.If the power is turned on or off using a switch such as a power tap connected to an AC adapter, the product or connected speakers may be damaged.
This product is intended for personal use by individuals.
Important Message
Safety Information
Do not use in places where water is directly exposed to the device. Also, please do not use it in an abnormal condition
Legal Disclaimer: PLEASE READ
Please refer to the instruction manual included