Feature

●No Cleaner Required: New upgrade foam gun with valve. After each use, simply close the valve and pull the trigger to push out the bubbles inside the gun. This is done instead of using additional cleaners
●【Easy to Use】The spring trigger and control knob allow you to control the flow rate precisely and adjust the spray distance. Eliminates waste of bubbles and the copper tip smooths the flow
●【ERGONOMIC DESIGN】The foam gun is covered with PTFE, which can keep the gun clean and durable. The handle is made of ABS plastic and is comfortable for long time use
●Spare Nozzle: To fill unusual deep gaps, there are 2 sizes (2.0 inches / 5.5 cm / 19 cm) extension tubes. Simply attach the plastic tube to the top of the metal gun tube and it is ready to use
●【Wide application】Suitable for balcony doors and windows, bathtubs and air conditioning holes. Ideal for filling small gaps, sealing and insulation


Description

Specification:
* Maximum output pressure: 8 MPa
* Max Flow Rate: 5 L/min
* Spray Width: 3mm


Package List:
2 x Caulking Guns
4 x Long Extension Tubes (19cm)
4 x Short Plastic Tubes (5cm)


Operation Instructions:
1. Open the foam gun and connect it to the entrance of the gun, rotate the gun to fix it. (Keeps valve closed)
2. Open the valve and press the trigger to spray.
3. You can adjust the flow rate by rotating the controller.
4.When you finish the spray, we have two options. If you want to remove the foam can, close the valve and press the trigger until the foam is gone, then remove the foam can. If you want to keep the can installed, please release the gun with the valve open.