Feature

●Demon Cambolt, Adjustable Width (Approx. 3 - 3.5 degrees), Black, Set of 2
●Compared to the standard camber bolt adjustment width (approximately), our Demon Cambolt is an amazing 3 to 3.5 degrees (approx.)
●Simply replace the bolt to achieve this camber angle
●One side is about 3° to 3.5° and one side is about 5°
●Reference compatibility: 30/50 Prius, 20/30, Alphard, Vellfire 80, Voxy, Noa, Esquaia, etc


Description

50000724-21

Demon Cambolt, Adjustable Width (Approx. 3 - 3.5 degrees), Black, Set of 2

Features:
The width of common camber bolts is adjusted to 1.75 degrees.
Our Demon Canvas Volts are an amazing 3 to 3.5 degrees!!

Just replace the bolt to achieve this camber angle.

Approximately 3° to 3.5° with 1 bottle per side
2 sticks on one side for about 5 degrees

We hope you can pursue your favorite camber angle!

Recommended for those occasions: ]
■ For more camber angles than typical camber bolts

■ After the introduction of the Weatre, the tire and wheels protrude from the fender.

■ Improve cornering performance and steering feel

■ The adjustable width of the upper mount is not enough for the camber angle.

■ The camber angle is too hard to wear the tires.

[Precautions]
Please use it for temporary use in events / photography from the point of intensity.
Instruction manual not included.
There may be scratches or stains as it is imported.
Alignment adjustment is recommended after installation.
This is a strut type product.
·We will disclaimer for damage or factory fees caused by installation of this product.
·Installation is done at your own risk.