Feature(may vary by option.)

●[Features] Can be installed on 99% projectors. 4 types of shafts to choose from, the product includes 2 types of long and short shafts. Please reassemble it according to your installation environment
●Flexible design for freedom of movement With a wide range of motion, you can adjust the angle from side to side, tilt up and down and level for easy angle adjustment on any ceiling
●[Installation] Projector hanging bracket that can be installed both on ceiling or on wall. Please choose the installation method according to your projector settings. Please check the instruction manual or video for detailed installation instructions. After installation, please make sure to install the wire to prevent falling
●Installation conditions: Please fix the top plate on a stubborn surface. If the ceiling is gypsum board, there is a risk of falling off. (*It can be installed by inserting plywood with a thickness of 0.4 inches (10 mm) or more. )
●Note: *The following projector cannot be mounted. No hanging structure (no screw holes) Small size (1 screw hole) Three-tube projector (Weight exceeding 44.1 lbs (20 kg)

[spider 2 (white)]




[Spider 3 (Black)]




[spider 3 (white)]




[Spider 2 (Black)]





Description

Projector ceiling bracket spider: 3 points to choose from.

99% projector compatible.99% projector compatible.

Length: Rebuild 4 typesLength: Rebuild 4 types

Angle, Rotate, Tilt, Can be installed Angle, Rotate, Tilt, Can be installed

Compatible with 99% projectors

All manufacturers have tested installation and can be installed in about 99% of projectors.

If the original manufacturer is a replacement for a new projector is most likely to work.

The Spider Series is built to last even when you buy a projector.Made in Japan.

■Not compatible with projectors.

· No suspended construction (no screw holes)

Small size (1 screw hole)

Three-tube projector (weight over 66.1 lbs (30 kg) )

4 types of shafts to choose from.

The product comes with 2 different shafts of long and short shafts.Please reassemble it according to your installation environment.

Length from ceiling to projector top:

Zero shaft: 4.3 inches (110 mm)

Short shaft: 7.5 inches (190 mm)

Long shaft: 13.8 inches (350 mm)

Wall Mount: 6.0 inches (152 mm)

Flexible design for freedom of movement

Adopts a variable arm that can be installed even if the manufacturer or model is different.

Front and back tilt: Up to 25 degrees.

Left and right tilt: Up to 35 degrees.

Left and right rotation: 360 degree rotation.