Feature

●You can clean it while changing the water. Cleverly suck up the garbage of the gravel
●The fish tank that looks beautiful is full of gravel with dirt such as droppings and leftovers. A cleaner that can easily be used to make troublesome gravel washing with water changes. Clean up the gravel without any effort and make it a clean aquarium!
●Newly designed flow control construction for easy one-handed operation. You can clean only the dirt in the gravel along with the water change, reducing the hassle of changing and cleaning
●Drainage is easy with a few pushes of the pump In addition, the pump is located at your hand, so you can start draining water in an effortless posture. Since it is a long pipe, it can be firmly inserted into an aquarium with plenty of sand at the bottom, and clean up the gravel
●Includes hose clip to secure drain hose to bucket Prevents hose from accidentally coming out of the bucket while draining Not only can it be used for cleaning gravel, but also for water changIdeal for large aquariums up to 17.7 inches (45 cm) in width up to 23.6 inches (60 cm)


Description

Product Description

The fish tank that looks beautiful is full of gravel with dirt such as droppings and leftovers. A cleaner that can easily be used to make troublesome gravel washing with water changes. Clean up the gravel without any effort and make it a clean aquarium! Newly designed flow control structure for easy one-handed operation. You can clean only the dirt in the gravel along with the water change, reducing the hassle of changing and cleaning. Drainage is easy with just a few pushes of the pump In addition, the pump is located at your hand, so you can start draining water in an effortless posture. Since it is a long pipe, it can be firmly inserted into an aquarium with plenty of sand at the bottom, and clean up the gravel. Includes a hose clip to secure the drain hose to the bucket. Prevents hose from accidentally coming out of the bucket while draining Not only can it be used for cleaning gravel, but also for water changes. If the drain hose is not located below the aquarium level you will not be able to start draining. Trash that is larger than the slideboard mesh hole cannot be sucked. Compatible Aquarium: Aquarium up to 17.7 inches (45 cm) tall for large aquariums, Drain Hose Length: Approx. 3.3 ft (1.1 m), Hose Diameter: Approx. 0.8 inches (20 mm), Inner Diameter: Approx. 0.6 inches (15 mm).

Indications

This product is for ornamental fish. Do not use for any other purpose. If the drain does not start properly, the hose and each joint may not be sufficient, or the flow adjustment knob is not maximized. Make sure the hose is plugged into the deep position and the flow control knob is at the max. Depending on the storage conditions, the hose may deform. If deformed, please put it in hot water and warm it while stretching

Important Message

Indications

This product is for ornamental fish. Do not use for any other purpose. If the drain does not start properly, the hose and each joint may not be sufficient, or the flow adjustment knob is not maximized. Make sure the hose is plugged into the deep position and the flow control knob is at the max. Depending on the storage conditions, the hose may deform. If deformed, please put it in hot water and warm it while stretching

Ingredients

PVC, ABS, EVA, PP

Directions

1. Secure the water absorption pipe in the water, and the drain hose to the bucket with hose clip. Please set the bucket in a lower position than the aquarium. 2. Hold the grip, the flow control knob maximizes the flow control knob, and the water absorption pipe is floating from the sand, then press the pump several times to start draining. 3. To minimize the flow rate, insert the water absorbing pipe into gravel, the gravel will be sucked up with water, so you can adjust the water volume with the control knob so that the gravel is mixed in and only the debris will be discharged. Sand may be inhaled if you use fine sand. If you want to leave water and discharge only garbage, please reduce the flow rate as much as possible. 4. If the water absorber pipe does not lift up the debris, change the location and insert the water absorbing pipe into gravel. Repeat 5.4 to clean the entire bottom. 6. When removing, please minimize the flow rate, remove the water absorbing pipe from gravel, and remove the gravel in the pipe. 7. After using, clean the dirt from the pipe or hose with tap water and let it dry and store. If the drain hose is not located below the aquarium level you will not be able to start draining. If the drain does not start properly, the hose and each joint may be insufficient or the flow adjustment knob is not maximum. Make sure that the hose is plugged into the deep and the flow control knob is the max. Even with the minimum flow control knob, water drainage cannot be completely stopped. Trash that is larger than the slideboard mesh hole cannot be sucked. If the dust or other debris gets clogged in the sandpaper, water cannot be drained. Remove the water absorption pipe and throttle to remove the debris. Do not disassemble the pump. "

Legal Disclaimer: PLEASE READ

Product specifications, design, and price may change without prior notice