Feature

●Weight: 12.8 oz (340 g)
●Country of Origin: Peoples Republic of China
●Product size (W x D x H): 5.1 x 3.0 x 14.6 inches (13 x 7.5 x 37 cm)
●Uses "Suposhupo" that can be easily used by anyone
●Change water in an effortless position or adjust the flow rate with your finger, making it easy for women to change water
●Comes with a tool to secure the hose to the bucket
●Compatible Aquarium: For small aquariums up to a standard width of 23.6 inches (60 cm) for aquariums with height of 14.2 inches (36 cm) or less


Description

Product Description

The "Suposhupo" gravel cleaner can be used easily by anyone. It is easy for women to change water in an effortless position or adjust the flow rate with your finger. The hose clip on the included parts prevents the hose from ramping and water spilling on the floor. The fish tank that looks beautiful is full of gravel with dirt such as droppings and leftovers. A cleaner that can easily be used to make troublesome gravel washing with water changes. Clean up the gravel without any effort and make it a clean aquarium! Newly designed flow control structure for easy one-handed operation. You can clean only the dirt in the gravel along with the water change, reducing the hassle of changing and cleaning. Drainage is easy with just a few pushes of the pump In addition, the pump is located at your hand, so you can start draining water in an effortless posture. Since it is a long pipe, it can be firmly inserted into an aquarium with plenty of sand at the bottom, and clean up the gravel. Includes a hose clip to secure the drain hose to the bucket. Prevents hose from accidentally coming out of the bucket while draining Not only can it be used for cleaning gravel, but also for water changes. (How to Use) 1. Secure the water absorbing pipe into the water and the drain hose to the bucket with a hose clip. 2. Hold the grip and press the pump several times to the maximum flow control knob and start drainage. 3. Insert the water absorbing pipe into the gravel and the gravel will be sucked up with water, so you can adjust the water volume with the flow control knob so that the gravel is mixed in and only the debris will be drained. Sand may be inhaled if you use fine sand. Sand may be sucked in if you want to drain only the garbage. 4. If the garbage does not lift up from the place where the water absorber pipe is inserted, please minimize the flow rate, then remove the water pipe from gravel and remove the gravel in the pipe. 5. Increase the flow rate, change the location and insert the water absorbing pipe into gravel. 6. Repeat 3, 4, and 5 to clean the entire bottom sand. If the drain hose is not located below the aquarium level you will not be able to start draining. Trash that is larger than the slideboard mesh hole cannot be sucked. Compatible Aquarium: Aquariums up to 14.2 inches (36 cm) tall to standard width 23.6 inches (60 cm) aquarium; Drain hose length: approx. 3.3 ft (1 m) Hose diameter: approx. 0.5 inch (13 mm), inner diameter approx. 0.4 inches (9 mm)

Indications

This product is for ornamental fish. Do not use for any other purpose. If the drain does not start properly, the hose and each joint may not be sufficient, or the flow adjustment knob is not maximized. Make sure the hose is plugged into the deep position and the flow control knob is at the max. Depending on the storage conditions, the hose may deform. If deformed, please put it in hot water and warm it while stretching

Important Message

Indications

This product is for ornamental fish. Do not use for any other purpose. If the drain does not start properly, the hose and each joint may not be sufficient, or the flow adjustment knob is not maximized. Make sure the hose is plugged into the deep position and the flow control knob is at the max. Depending on the storage conditions, the hose may deform. If deformed, please put it in hot water and warm it while stretching

Ingredients

PVC, ABS, EVA, PP

Directions

1.Fix the water absorption pipe in water and drain hose to the bucket with hose clip. 2. Hold the grip and press the pump several times to the maximum flow control knob and start drainage. 3. Insert the water absorbing pipe into the gravel and the gravel will be sucked up with water, so you can adjust the water volume with the flow control knob so that the gravel is mixed in and only the debris will be drained. Sand may be inhaled if you use fine sand. Sand may be sucked in if you want to drain only the garbage. 4. If the garbage does not lift up from the place where the water absorber pipe is inserted, please minimize the flow rate, then remove the water pipe from gravel and remove the gravel in the pipe. 5. Increase the flow rate, change the location and insert the water absorbing pipe into gravel. 6. Repeat 3, 4, 5 to clean the entire bottom sand. If the drain hose is not located below the aquarium level you will not be able to start draining. Trash that is larger than the slideboard mesh hole cannot be sucked

Legal Disclaimer: PLEASE READ

Product specifications, design, and price may change without prior notice