[Nipple]
[chrome]
[Black]
Material: Brass
Finish:Chrome
Package Included:
1 x Faucet Diverter
1 x M 22 to M 24 External Tooth Screw Adapter
Note:
1.Faucet diverter not including shower head and shower hose.
2. When installing, just twist the nut, so be careful not to rotate the unit too hard to prevent water leakage.
The shower diverter has a M 22 water outlet, and the outlet is G 1/2 size, and the water outlet can be divided into 2 parts.
The diverter has a removable adapter: M22-M24 external teeth.If the faucet is M24 faucet, you can install it to connect it.
Pull down the diverter handle and the water will flow out from the faucet.
When you need shower head water, you need to turn the handle upward, and you can easily switch the water from faucet and hand shower.
|
|
|
---|---|---|
Good looking studs.The diverter is made of brass and is resistant to rust and will last a long time. |
M22 Internal Tooth Screw DiverterShunt connector is an M 22 internal tooth screw, and the connectable faucet is an M 22 external tooth thread. |
Smooth HandleSmooth handle designYou can easily change the flow by rotating the handle up and down, easy and convenient. |
|
|
|
---|---|---|
Bakki SotchiThe inflator is shatterproof and has a soft flow of water to save water. |
G 1/2 ConnectorThe diverter outlet is G1/2 outer teeth and can be connected to a standard 1/2" hose. |
PartsPackage Included: 1 x M 22 internal tooth screw diverter. 2 x rubber seals 1 x M 22 to M 24 adapter |
|
|
|
|
---|---|---|---|
1. When using the adapter, please put the white rubber ring on the connection point. |
2.Then screw the M 24 male adapter into the M 24 female faucet(if the faucet size is M 22 male, you dont need to put the adapter) |
3. Screw the diverter into the M 22 male connector. |
4. Finally, screw the G 1/2 size hose into the shunt outlet. |