Specifications:
Item Type: Manual Pressure Test Pump
Maximum Test Pressure: 1,000 PSI / 7 MPa
Instructions:
1. Install the machine and fix the pump body to the water tank with 4 screws.
2. Attach the water pipe and connect to the pump body (Note: seal connection, add washers, Teflon tape can be used. Otherwise, it will leak easily).
3. Connect the other end of the outlet hose to the pipe to test
4.Fill the test tube, deflate the air, then close the pressure release valve.
5. Fill the water tank with water and shake the handle up and down to start the pressure test.
6. If the pressure gauge rises to the desired pressure, the pressure can be stopped (normal water pressure is 0.3 MPa, the water pressure of the high level residential is 0.4 MPa, and the water pipe pressure test is generally 0.8 - 1 Mpa, and 0.1. Mpa equals 1kg pressure)
7. After stopping the back pressure, if the pressure is not reduced, it can prove that the pipe pressure is good. On the contrary, the sealed tube is not good, and there is a leakage that causes pressure reduction.
Package List:
1 x Pump
1 x Handle
1 x water pipe.
9 x Seal Rings
1 x User Manual