[Main unit only]
[Remote Control Set]
USB microphone function that can be recorded directly to a computer.
Equipped with a USB audio interface function, it can be used as a USB microphone to input audio directly to the computer.
With detailed waveform editing and high quality equalizing/dynamics processing, you can make your recording data at a productive level.
In addition, you can download the MS decoder plug-in which converts data from H2n recorded M/S signal to stereo L/R signals at no cost from the ZOOM site.
Controls MID/SIDE faders to control stereo sound imagery.
"
For example,
The H2n Handy Recorder is the only portable recorder with 4 types of recording modes: XY stereo, MS stereo, 2 channel surround and 4 channel surroundIt also has a built-in auto gain control, compressor, limiter, low cut filter and MS decoder.It also functions as a USB microphone on PC/Mac.
|
|
|
---|---|---|
MS RecordingMS recording is an amazing technique that allows you to adjust the stereo spread after recording.Whats more, it is fully compatible with mono, so it is useful for recording audio from movies, videos, and TV shows. The MS Microphone combines a unidirectional mid-mic for capturing forward sounds and a bi-directional side mic that captures sound from left and right. The H2n built-in MS decoder allows you to adjust the Mid and Side levels while recording and post-production as well as after recording.Raising the side level for a more stereo feel. |
XY RecordingXY Recording is a technique that allows you to record a wide stereo space while keeping the center position sound image clear, making it ideal for all types of stereo recording. The H2ns built-in XY microphone set two matching microphones to 90º perfect for most stereo recording. |
Surround RecordingThe H2n combines the XY microphone and MS microphone for recording surround sounds from all directions as well as the front and 360°. Two channel mode creates a stereo file with a mix of sound from all H2n microphones; 4 channel mode creates two files of a stereo file that has been collected by the XY microphone and a stereo file that has been recorded by a MS microphone.You can connect the signal of each track to each speaker to play back to create a surround space or mix it into a stereo track.In either mode, you can also adjust the level of the MS microphones side microphone using the built-in MS decoder on the H2n. |
|
|
|
---|---|---|
Input/OutputThe H2n line input has a 3.5mm stereo mini jack that can input two channels of microphone and line level signals.It also supports 2.5 V plug-in power, so you can connect the electric condenser microphone.The microphone gain has an analog style volume and can be adjusted manually for each input level.It also has 3 types of auto gain functions that can automatically optimize the recording level.
The line output is a 3.5mm mini stereo jack with dedicated volume control.Headphones can also be connected to this terminal, making them ideal for monitoring input and recording levels during recording.In addition, the mono speaker is built into the back of the main unit, so you can check the recording immediately without connecting anything after recording.
The H2n USB port can be used to transfer digital data such as stereo mixes to a computer and easily transfer data to audio editing software such as the included WaveLab LE.It can also be used as a 2 in / 2 out USB audio interface or a USB microphone. |
Pre-record functionThe interview began while you are not ready for recording...The conductor began to shake the tact while checking the cable...Performer appears in front of camera faster than script...Each one is a nightmare moment for the recorder. H2n will not have such nightmares.Pre-Record function allows you to record your precious moments without missing the precious moment as you press the recording button at all times before *2 seconds. *4CH surround mode / 96kHz sampling setting will be recorded from 1 second. |
Auto Record FunctionAuto Record function automatically starts recording when the input signal exceeds the set level.It also has an auto-record stop function that automatically stops recording when the input signal falls below the set level. |